wangdan/watchrobot

danny wang a136536ff5 watchrobot first commit		1 vuosi sitten
..
README.md	a136536ff5 watchrobot first commit	1 vuosi sitten
__init__.py	a136536ff5 watchrobot first commit	1 vuosi sitten
apmsetrate.py	a136536ff5 watchrobot first commit	1 vuosi sitten
bwtest.py	a136536ff5 watchrobot first commit	1 vuosi sitten
magtest.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mav2pcap.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mav_accel.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mavgps.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mavtcpsniff.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mavtest.py	a136536ff5 watchrobot first commit	1 vuosi sitten
mavtester.py	a136536ff5 watchrobot first commit	1 vuosi sitten
wptogpx.py	a136536ff5 watchrobot first commit	1 vuosi sitten

		
				README.md
			
				pymavlink Examples

File
Description

mavtest.py
Demonstrates creating a mavlink message, putting it on a buffer and then decoding from said buffer.

bwtest.py
Check bandwith of link. Display results on terminal.

mav_accel.py
Show accelerometer calibration for a set of logs.

apmsetrate.py
Set the Stream Rate on an APM.

magtest.py
Rotate APMs on bench to test magnetometers.

mavtcpsniff.py
Connect as a client to two tcpip ports on localhost with mavlink packets. Pass them both directions, and show packets in human-readable format on-screen.

mav2pcap.py
Packetizes a binary MAVLink stream. The resulting packets are stored into a PCAP file, which is compatible to tools like Wireshark.

wptogpx.py
Extract GPS data from a waypoint file, and create a GPX file, for loading into Google Earth.

mavgps.py
Allows connection of the uBlox u-Center software to a uBlox GPS device connected to a PX4 or Pixhawk device, using Mavlink's SERIAL_CONTROL support to route serial traffic to/from the GPS, and exposing the data to u-Center via a local TCP connection.

mavtester.py
Test mavlink messages.

File	Description
mavtest.py	Demonstrates creating a mavlink message, putting it on a buffer and then decoding from said buffer.
bwtest.py	Check bandwith of link. Display results on terminal.
mav_accel.py	Show accelerometer calibration for a set of logs.
apmsetrate.py	Set the Stream Rate on an APM.
magtest.py	Rotate APMs on bench to test magnetometers.
mavtcpsniff.py	Connect as a client to two tcpip ports on localhost with mavlink packets. Pass them both directions, and show packets in human-readable format on-screen.
mav2pcap.py	Packetizes a binary MAVLink stream. The resulting packets are stored into a PCAP file, which is compatible to tools like Wireshark.
wptogpx.py	Extract GPS data from a waypoint file, and create a GPX file, for loading into Google Earth.
mavgps.py	Allows connection of the uBlox u-Center software to a uBlox GPS device connected to a PX4 or Pixhawk device, using Mavlink's SERIAL_CONTROL support to route serial traffic to/from the GPS, and exposing the data to u-Center via a local TCP connection.
mavtester.py	Test mavlink messages.