main.c 3.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133
  1. /*
  2. ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
  3. Licensed under the Apache License, Version 2.0 (the "License");
  4. you may not use this file except in compliance with the License.
  5. You may obtain a copy of the License at
  6. http://www.apache.org/licenses/LICENSE-2.0
  7. Unless required by applicable law or agreed to in writing, software
  8. distributed under the License is distributed on an "AS IS" BASIS,
  9. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  10. See the License for the specific language governing permissions and
  11. limitations under the License.
  12. */
  13. #include "ch.h"
  14. #include "hal.h"
  15. #include "chprintf.h"
  16. #include "lps22hb.h"
  17. #define cls(chp) chprintf(chp, "\033[2J\033[1;1H")
  18. /*===========================================================================*/
  19. /* LPS22HB related. */
  20. /*===========================================================================*/
  21. /* LPS22HB Driver: This object represent an LPS22HB instance */
  22. static LPS22HBDriver LPS22HBD1;
  23. static int32_t baroraw;
  24. static int32_t thermoraw;
  25. static float barocooked;
  26. static float thermocooked;
  27. static const I2CConfig i2ccfg = {
  28. OPMODE_I2C,
  29. 400000,
  30. FAST_DUTY_CYCLE_2,
  31. };
  32. static const LPS22HBConfig lps22hbcfg = {
  33. &I2CD1,
  34. &i2ccfg,
  35. LPS22HB_SAD_VCC,
  36. NULL,
  37. NULL,
  38. NULL,
  39. NULL,
  40. LPS22HB_ODR_10HZ,
  41. #if LPS22HB_USE_ADVANCED
  42. LPS22HB_BDU_CONTINUOUS,
  43. LPS22HB_LP_ODR_9
  44. #endif
  45. };
  46. /*===========================================================================*/
  47. /* Generic code. */
  48. /*===========================================================================*/
  49. static BaseSequentialStream* chp = (BaseSequentialStream*)&SD2;
  50. /*
  51. * LED blinker thread, times are in milliseconds.
  52. */
  53. static THD_WORKING_AREA(waThread1, 128);
  54. static THD_FUNCTION(Thread1, arg) {
  55. (void)arg;
  56. chRegSetThreadName("blinker");
  57. while (true) {
  58. palToggleLine(LINE_LED_GREEN);
  59. chThdSleepMilliseconds(500);
  60. }
  61. }
  62. /*
  63. * Application entry point.
  64. */
  65. int main(void) {
  66. /*
  67. * System initializations.
  68. * - HAL initialization, this also initializes the configured device drivers
  69. * and performs the board-specific initializations.
  70. * - Kernel initialization, the main() function becomes a thread and the
  71. * RTOS is active.
  72. */
  73. halInit();
  74. chSysInit();
  75. /* Configuring I2C SCK and I2C SDA related GPIOs .*/
  76. palSetLineMode(LINE_ARD_D15, PAL_MODE_ALTERNATE(4) |
  77. PAL_STM32_OSPEED_HIGHEST | PAL_STM32_OTYPE_OPENDRAIN);
  78. palSetLineMode(LINE_ARD_D14, PAL_MODE_ALTERNATE(4) |
  79. PAL_STM32_OSPEED_HIGHEST | PAL_STM32_OTYPE_OPENDRAIN);
  80. /* Activates the serial driver 2 using the driver default configuration.*/
  81. sdStart(&SD2, NULL);
  82. /* Creates the blinker thread.*/
  83. chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
  84. /* LPS22HB Object Initialization.*/
  85. lps22hbObjectInit(&LPS22HBD1);
  86. /* Activates the LPS22HB driver.*/
  87. lps22hbStart(&LPS22HBD1, &lps22hbcfg);
  88. /* Normal main() thread activity, printing MEMS data on the SD2. */
  89. while (true) {
  90. lps22hbBarometerReadRaw(&LPS22HBD1, &baroraw);
  91. chprintf(chp, "LPS22HBD1 Barometer raw data...\r\n");
  92. chprintf(chp, "Pres: %d\r\n", baroraw);
  93. lps22hbThermometerReadRaw(&LPS22HBD1, &thermoraw);
  94. chprintf(chp, "LPS22HBD1 Thermometer raw data...\r\n");
  95. chprintf(chp, "Temp: %d\r\n", &thermoraw);
  96. lps22hbBarometerReadCooked(&LPS22HBD1, &barocooked);
  97. chprintf(chp, "LPS22HBD1 Barometer cooked data...\r\n");
  98. chprintf(chp, "Pres: %.2f\r\n", barocooked);
  99. lps22hbThermometerReadCooked(&LPS22HBD1, &thermocooked);
  100. chprintf(chp, "LPS22HBD1 Thermometer cooked data...\r\n");
  101. chprintf(chp, "Temp: %.2f\r\n", thermocooked);
  102. chThdSleepMilliseconds(100);
  103. cls(chp);
  104. }
  105. lps22hbStop(&LPS22HBD1);
  106. }