123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247 |
- /*
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- //
- // SiRF Binary GPS driver for ArduPilot and ArduPilotMega.
- // Code by Michael Smith.
- //
- #include "AP_GPS_SIRF.h"
- #include <stdint.h>
- // Initialisation messages
- //
- // Turn off all messages except for 0x29.
- //
- // XXX the bytes show up on the wire, but at least my test unit (EM-411) seems to ignore them.
- //
- const uint8_t AP_GPS_SIRF::_initialisation_blob[] = {
- 0xa0, 0xa2, 0x00, 0x08, 0xa6, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa8, 0xb0, 0xb3,
- 0xa0, 0xa2, 0x00, 0x08, 0xa6, 0x00, 0x29, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd0, 0xb0, 0xb3
- };
- AP_GPS_SIRF::AP_GPS_SIRF(AP_GPS &_gps, AP_GPS::GPS_State &_state, AP_HAL::UARTDriver *_port) :
- AP_GPS_Backend(_gps, _state, _port)
- {
- gps.send_blob_start(state.instance, (const char *)_initialisation_blob, sizeof(_initialisation_blob));
- }
- // Process bytes available from the stream
- //
- // The stream is assumed to contain only messages we recognise. If it
- // contains other messages, and those messages contain the preamble
- // bytes, it is possible for this code to fail to synchronise to the
- // stream immediately. Without buffering the entire message and
- // re-processing it from the top, this is unavoidable. The parser
- // attempts to avoid this when possible.
- //
- bool
- AP_GPS_SIRF::read(void)
- {
- uint8_t data;
- int16_t numc;
- bool parsed = false;
- numc = port->available();
- while(numc--) {
- // read the next byte
- data = port->read();
- switch(_step) {
- // Message preamble detection
- //
- // If we fail to match any of the expected bytes, we reset
- // the state machine and re-consider the failed byte as
- // the first byte of the preamble. This improves our
- // chances of recovering from a mismatch and makes it less
- // likely that we will be fooled by the preamble appearing
- // as data in some other message.
- //
- case 1:
- if (PREAMBLE2 == data) {
- _step++;
- break;
- }
- _step = 0;
- FALLTHROUGH;
- case 0:
- if(PREAMBLE1 == data)
- _step++;
- break;
- // Message length
- //
- // We always collect the length so that we can avoid being
- // fooled by preamble bytes in messages.
- //
- case 2:
- _step++;
- _payload_length = (uint16_t)data << 8;
- break;
- case 3:
- _step++;
- _payload_length |= data;
- _payload_counter = 0;
- _checksum = 0;
- break;
- // Message header processing
- //
- // We sniff the message ID to determine whether we are going
- // to gather the message bytes or just discard them.
- //
- case 4:
- _step++;
- _accumulate(data);
- _payload_length--;
- _gather = false;
- switch(data) {
- case MSG_GEONAV:
- if (_payload_length == sizeof(sirf_geonav)) {
- _gather = true;
- _msg_id = data;
- }
- break;
- }
- break;
- // Receive message data
- //
- // Note that we are effectively guaranteed by the protocol
- // that the checksum and postamble cannot be mistaken for
- // the preamble, so if we are discarding bytes in this
- // message when the payload is done we return directly
- // to the preamble detector rather than bothering with
- // the checksum logic.
- //
- case 5:
- if (_gather) { // gather data if requested
- _accumulate(data);
- _buffer[_payload_counter] = data;
- if (++_payload_counter == _payload_length)
- _step++;
- } else {
- if (++_payload_counter == _payload_length)
- _step = 0;
- }
- break;
- // Checksum and message processing
- //
- case 6:
- _step++;
- if ((_checksum >> 8) != data) {
- _step = 0;
- }
- break;
- case 7:
- _step = 0;
- if ((_checksum & 0xff) != data) {
- break;
- }
- if (_gather) {
- parsed = _parse_gps(); // Parse the new GPS packet
- }
- }
- }
- return(parsed);
- }
- bool
- AP_GPS_SIRF::_parse_gps(void)
- {
- switch(_msg_id) {
- case MSG_GEONAV:
- //time = _swapl(&_buffer.nav.time);
- // parse fix type
- if (_buffer.nav.fix_invalid) {
- state.status = AP_GPS::NO_FIX;
- }else if ((_buffer.nav.fix_type & FIX_MASK) == FIX_3D) {
- state.status = AP_GPS::GPS_OK_FIX_3D;
- }else{
- state.status = AP_GPS::GPS_OK_FIX_2D;
- }
- state.location.lat = swap_int32(_buffer.nav.latitude);
- state.location.lng = swap_int32(_buffer.nav.longitude);
- state.location.alt = swap_int32(_buffer.nav.altitude_msl);
- state.ground_speed = swap_int32(_buffer.nav.ground_speed)*0.01f;
- state.ground_course = wrap_360(swap_int16(_buffer.nav.ground_course)*0.01f);
- state.num_sats = _buffer.nav.satellites;
- fill_3d_velocity();
- return true;
- }
- return false;
- }
- void
- AP_GPS_SIRF::_accumulate(uint8_t val)
- {
- _checksum = (_checksum + val) & 0x7fff;
- }
- /*
- detect a SIRF GPS
- */
- bool AP_GPS_SIRF::_detect(struct SIRF_detect_state &state, uint8_t data)
- {
- switch (state.step) {
- case 1:
- if (PREAMBLE2 == data) {
- state.step++;
- break;
- }
- state.step = 0;
- FALLTHROUGH;
- case 0:
- state.payload_length = state.payload_counter = state.checksum = 0;
- if (PREAMBLE1 == data)
- state.step++;
- break;
- case 2:
- state.step++;
- if (data != 0) {
- // only look for short messages
- state.step = 0;
- }
- break;
- case 3:
- state.step++;
- state.payload_length = data;
- break;
- case 4:
- state.checksum = (state.checksum + data) & 0x7fff;
- if (++state.payload_counter == state.payload_length) {
- state.step++;
- }
- break;
- case 5:
- state.step++;
- if ((state.checksum >> 8) != data) {
- state.step = 0;
- }
- break;
- case 6:
- state.step = 0;
- if ((state.checksum & 0xff) == data) {
- return true;
- }
- }
- return false;
- }
|