123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257 |
- /**
- ******************************************************************************
- * @file stm32l4xx.h
- * @author MCD Application Team
- * @brief CMSIS STM32L4xx Device Peripheral Access Layer Header File.
- *
- * The file is the unique include file that the application programmer
- * is using in the C source code, usually in main.c. This file contains:
- * - Configuration section that allows to select:
- * - The STM32L4xx device used in the target application
- * - To use or not the peripheral’s drivers in application code(i.e.
- * code will be based on direct access to peripheral’s registers
- * rather than drivers API), this option is controlled by
- * "#define USE_HAL_DRIVER"
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
- /** @addtogroup CMSIS
- * @{
- */
- /** @addtogroup stm32l4xx
- * @{
- */
- #ifndef __STM32L4xx_H
- #define __STM32L4xx_H
- #ifdef __cplusplus
- extern "C" {
- #endif /* __cplusplus */
- /** @addtogroup Library_configuration_section
- * @{
- */
- /**
- * @brief STM32 Family
- */
- #if !defined (STM32L4)
- #define STM32L4
- #endif /* STM32L4 */
- /* Uncomment the line below according to the target STM32L4 device used in your
- application
- */
- #if !defined (STM32L431xx) && !defined (STM32L432xx) && !defined (STM32L433xx) && !defined (STM32L442xx) && !defined (STM32L443xx) && \
- !defined (STM32L451xx) && !defined (STM32L452xx) && !defined (STM32L462xx) && \
- !defined (STM32L471xx) && !defined (STM32L475xx) && !defined (STM32L476xx) && !defined (STM32L485xx) && !defined (STM32L486xx) && \
- !defined (STM32L496xx) && !defined (STM32L4A6xx) && \
- !defined (STM32L4R5xx) && !defined (STM32L4R7xx) && !defined (STM32L4R9xx) && !defined (STM32L4S5xx) && !defined (STM32L4S7xx) && !defined (STM32L4S9xx)
- /* #define STM32L431xx */ /*!< STM32L431xx Devices */
- /* #define STM32L432xx */ /*!< STM32L432xx Devices */
- /* #define STM32L433xx */ /*!< STM32L433xx Devices */
- /* #define STM32L442xx */ /*!< STM32L442xx Devices */
- /* #define STM32L443xx */ /*!< STM32L443xx Devices */
- /* #define STM32L451xx */ /*!< STM32L451xx Devices */
- /* #define STM32L452xx */ /*!< STM32L452xx Devices */
- /* #define STM32L462xx */ /*!< STM32L462xx Devices */
- /* #define STM32L471xx */ /*!< STM32L471xx Devices */
- /* #define STM32L475xx */ /*!< STM32L475xx Devices */
- /* #define STM32L476xx */ /*!< STM32L476xx Devices */
- /* #define STM32L485xx */ /*!< STM32L485xx Devices */
- /* #define STM32L486xx */ /*!< STM32L486xx Devices */
- /* #define STM32L496xx */ /*!< STM32L496xx Devices */
- /* #define STM32L4A6xx */ /*!< STM32L4A6xx Devices */
- /* #define STM32L4R5xx */ /*!< STM32L4R5xx Devices */
- /* #define STM32L4R7xx */ /*!< STM32L4R7xx Devices */
- /* #define STM32L4R9xx */ /*!< STM32L4R9xx Devices */
- /* #define STM32L4S5xx */ /*!< STM32L4S5xx Devices */
- /* #define STM32L4S7xx */ /*!< STM32L4S7xx Devices */
- /* #define STM32L4S9xx */ /*!< STM32L4S9xx Devices */
- #endif
- /* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
- #if !defined (USE_HAL_DRIVER)
- /**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
- /*#define USE_HAL_DRIVER */
- #endif /* USE_HAL_DRIVER */
- /**
- * @brief CMSIS Device version number
- */
- #define __STM32L4_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
- #define __STM32L4_CMSIS_VERSION_SUB1 (0x04) /*!< [23:16] sub1 version */
- #define __STM32L4_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
- #define __STM32L4_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
- #define __STM32L4_CMSIS_VERSION ((__STM32L4_CMSIS_VERSION_MAIN << 24)\
- |(__STM32L4_CMSIS_VERSION_SUB1 << 16)\
- |(__STM32L4_CMSIS_VERSION_SUB2 << 8 )\
- |(__STM32L4_CMSIS_VERSION_RC))
- /**
- * @}
- */
- /** @addtogroup Device_Included
- * @{
- */
- #if defined(STM32L431xx)
- #include "stm32l431xx.h"
- #elif defined(STM32L432xx)
- #include "stm32l432xx.h"
- #elif defined(STM32L433xx)
- #include "stm32l433xx.h"
- #elif defined(STM32L442xx)
- #include "stm32l442xx.h"
- #elif defined(STM32L443xx)
- #include "stm32l443xx.h"
- #elif defined(STM32L451xx)
- #include "stm32l451xx.h"
- #elif defined(STM32L452xx)
- #include "stm32l452xx.h"
- #elif defined(STM32L462xx)
- #include "stm32l462xx.h"
- #elif defined(STM32L471xx)
- #include "stm32l471xx.h"
- #elif defined(STM32L475xx)
- #include "stm32l475xx.h"
- #elif defined(STM32L476xx)
- #include "stm32l476xx.h"
- #elif defined(STM32L485xx)
- #include "stm32l485xx.h"
- #elif defined(STM32L486xx)
- #include "stm32l486xx.h"
- #elif defined(STM32L496xx)
- #include "stm32l496xx.h"
- #elif defined(STM32L4A6xx)
- #include "stm32l4a6xx.h"
- #elif defined(STM32L4R5xx)
- #include "stm32l4r5xx.h"
- #elif defined(STM32L4R7xx)
- #include "stm32l4r7xx.h"
- #elif defined(STM32L4R9xx)
- #include "stm32l4r9xx.h"
- #elif defined(STM32L4S5xx)
- #include "stm32l4s5xx.h"
- #elif defined(STM32L4S7xx)
- #include "stm32l4s7xx.h"
- #elif defined(STM32L4S9xx)
- #include "stm32l4s9xx.h"
- #else
- #error "Please select first the target STM32L4xx device used in your application (in stm32l4xx.h file)"
- #endif
- /**
- * @}
- */
- /** @addtogroup Exported_types
- * @{
- */
- typedef enum
- {
- RESET = 0,
- SET = !RESET
- } FlagStatus, ITStatus;
- typedef enum
- {
- DISABLE = 0,
- ENABLE = !DISABLE
- } FunctionalState;
- #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
- typedef enum
- {
- ERROR = 0,
- SUCCESS = !ERROR
- } ErrorStatus;
- /**
- * @}
- */
- /** @addtogroup Exported_macros
- * @{
- */
- #define SET_BIT(REG, BIT) ((REG) |= (BIT))
- #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
- #define READ_BIT(REG, BIT) ((REG) & (BIT))
- #define CLEAR_REG(REG) ((REG) = (0x0))
- #define WRITE_REG(REG, VAL) ((REG) = (VAL))
- #define READ_REG(REG) ((REG))
- #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
- #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
- /**
- * @}
- */
- #if defined (USE_HAL_DRIVER)
- #include "stm32l4xx_hal.h"
- #endif /* USE_HAL_DRIVER */
- #ifdef __cplusplus
- }
- #endif /* __cplusplus */
- #endif /* __STM32L4xx_H */
- /**
- * @}
- */
- /**
- * @}
- */
- /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|