watchrobot/modules/ChibiOS/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/mcuconf.h

/*
    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

#ifndef MCUCONF_H
#define MCUCONF_H

/*
 * AVR drivers configuration.
 * The following settings override the default settings present in
 * the various device driver implementation headers.
 * Note that the settings for each driver only have effect if the driver
 * is enabled in halconf.h.
 */

/*
 * ADC driver system settings.
 */
#define AVR_ADC_USE_ADC1                   FALSE

/*
 * DAC driver system settings.
 */
#define AVR_DAC_USE_DAC1                   TRUE

/*
 * EXT drivers system settings.
 */
#define AVR_EXT_USE_INT0                   FALSE
#define AVR_EXT_USE_INT1                   FALSE
#define AVR_EXT_USE_INT2                   FALSE
#define AVR_EXT_USE_INT3                   FALSE
#define AVR_EXT_USE_INT4                   FALSE
#define AVR_EXT_USE_INT5                   FALSE

/*
 * PCINT driver system settings.
 */
#define AVR_EXT_USE_PCINT0                 FALSE
#define AVR_EXT_USE_PCINT1                 FALSE
#define AVR_EXT_USE_PCINT2                 FALSE
#define AVR_EXT_USE_PCINT3                 FALSE
#define AVR_EXT_USE_PCINT4                 FALSE
#define AVR_EXT_USE_PCINT5                 FALSE
#define AVR_EXT_USE_PCINT6                 FALSE
#define AVR_EXT_USE_PCINT7                 FALSE
#define AVR_EXT_USE_PCINT8                 FALSE
#define AVR_EXT_USE_PCINT9                 FALSE
#define AVR_EXT_USE_PCINT10                FALSE

/*
 * CAN driver system settings.
 */

/*
 * MAC driver system settings.
 */

/*
 * PWM driver system settings.
 */
#define AVR_PWM_USE_TIM1                   FALSE
#define AVR_PWM_USE_TIM2                   FALSE
#define AVR_PWM_USE_TIM3                   FALSE
#define AVR_PWM_USE_TIM4                   FALSE
#define AVR_PWM_USE_TIM5                   FALSE

/*
 * ICU driver system settings.
 */
#define AVR_ICU_USE_TIM1                   FALSE
#define AVR_ICU_USE_TIM3                   FALSE
#define AVR_ICU_USE_TIM4                   FALSE
#define AVR_ICU_USE_TIM5                   FALSE

/*
 * GPT driver system settings.
 */
#define AVR_GPT_USE_TIM1                   FALSE
#define AVR_GPT_USE_TIM2                   FALSE
#define AVR_GPT_USE_TIM3                   FALSE
#define AVR_GPT_USE_TIM4                   FALSE
#define AVR_GPT_USE_TIM5                   FALSE

/*
 * SERIAL driver system settings.
 */
#define AVR_SERIAL_USE_USART1              TRUE   /* USARTC0. */
#define AVR_SERIAL_USE_USART2              FALSE  /* USARTC1. */
#define AVR_SERIAL_USE_USART3              FALSE  /* USARTD0. */
#define AVR_SERIAL_USE_USART4              FALSE  /* USARTD1. */
#define AVR_SERIAL_USE_USART5              FALSE  /* USARTE0. */
//TODO: Define the priority if the datasheet define this parameter.
//#define AVR_UART_USART1_IRQ_PRIORITY      12
//#define AVR_UART_USART2_IRQ_PRIORITY      12
//#define AVR_UART_USART3_IRQ_PRIORITY      12
//#define AVR_UART_USART4_IRQ_PRIORITY      12
//#define AVR_UART_USART5_IRQ_PRIORITY      12

/*
 * UART driver system settings.
 */
#define AVR_UART_USE_USART1              FALSE  /* USARTC0. */
#define AVR_UART_USE_USART2              FALSE  /* USARTC1. */
#define AVR_UART_USE_USART3              FALSE  /* USARTD0. */
#define AVR_UART_USE_USART4              FALSE  /* USARTD1. */
#define AVR_UART_USE_USART5              FALSE  /* USARTE0. */
// TODO: Definen the DMA stream like bellow
//#define AVR_UART_USART1_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
//#define AVR_UART_USART2_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
//#define AVR_UART_USART3_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
//#define AVR_UART_USART4_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
//#define AVR_UART_USART5_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
//TODO: Define the priority if the datasheet define this parameter.
//#define AVR_UART_USART1_IRQ_PRIORITY      12
//#define AVR_UART_USART2_IRQ_PRIORITY      12
//#define AVR_UART_USART3_IRQ_PRIORITY      12
//#define AVR_UART_USART4_IRQ_PRIORITY      12
//#define AVR_UART_USART5_IRQ_PRIORITY      12


/*
 * I2C driver system settings.
 */
#define AVR_I2C_USE_I2C1                   FALSE

/*
 * SPI driver system settings.
 */
#define AVR_SPI_USE_SPI1                   FALSE
#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE

/*
 * USB driver system settings.
 */
#define AVR_USB_USE_USB1                   FALSE
#define AVR_USB_USE_NAMED_ADDRESS_SPACES   FALSE

#endif /* MCUCONF_H */