| 123456789101112131415161718192021222324 |
- *****************************************************************************
- ** ChibiOS/RT port for ATxmega128a4u. **
- *****************************************************************************
- ** TARGET **
- The demo runs on the mattair Tech MT-DB-X4 board.
- ** The Demo **
- The demo demonstrate the use of the SPI driver. Every time an Hello world
- massage is printed to the serial console, four bytes are also send to the
- spi bus.
- To see the messages, you need to connect an FTDI converter to
- USARTC0 (PINC3 is MCU TX and PINC2 is MCU RX).
- ** Build Procedure **
- The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
- ** Programming procedure **
- The board can be flash by using the Makefile and the DFU Programmer tools.
- See the make file for more details.
|
