danny wang a136536ff5 watchrobot first commit пре 2 година
..
cfg a136536ff5 watchrobot first commit пре 2 година
debug a136536ff5 watchrobot first commit пре 2 година
.cproject a136536ff5 watchrobot first commit пре 2 година
.project a136536ff5 watchrobot first commit пре 2 година
Makefile a136536ff5 watchrobot first commit пре 2 година
main.c a136536ff5 watchrobot first commit пре 2 година
readme.txt a136536ff5 watchrobot first commit пре 2 година

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F303. **
*****************************************************************************

** TARGET **

The demo runs on an STM32 Nucleo144-F303ZE board.

** The Demo **

The demo flashes the board LEDs using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD3 (USART3, mapped on STLink v2-1 Virtual COM Port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com