danny wang
a136536ff5
watchrobot first commit
|
2 gadi atpakaļ | |
|---|---|---|
| .. | ||
| Makefile | 2 gadi atpakaļ | |
| chconf.h | 2 gadi atpakaļ | |
| halconf.h | 2 gadi atpakaļ | |
| main.c | 2 gadi atpakaļ | |
| mcuconf.h | 2 gadi atpakaļ | |
| readme.txt | 2 gadi atpakaļ | |
| usbcfg.c | 2 gadi atpakaļ | |
| usbcfg.h | 2 gadi atpakaļ | |
readme.txt
*****************************************************************************
** ChibiOS/RT port for Atmel AVR AT90USB128. **
*****************************************************************************
** TARGET **
The demo runs on an PJRC Teensy 2++ board.
** The Demo **
The demo creates a standard serial-over-USB (CDC) slave device. The simple
ChibiOS shell is run on the USB serial connection and can be interacted
with by a standard serial port program (e.g. putty or screen).
** Build Procedure **
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
** Notes **
The USB driver itself is not that heavyweight but this demo requires a bit of
flash space and memory because of the nature of the ChibiOS shell code and
supporting functionality.
** ChibiOS/RT port for Atmel AVR AT90USB128. **
*****************************************************************************
** TARGET **
The demo runs on an PJRC Teensy 2++ board.
** The Demo **
The demo creates a standard serial-over-USB (CDC) slave device. The simple
ChibiOS shell is run on the USB serial connection and can be interacted
with by a standard serial port program (e.g. putty or screen).
** Build Procedure **
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
** Notes **
The USB driver itself is not that heavyweight but this demo requires a bit of
flash space and memory because of the nature of the ChibiOS shell code and
supporting functionality.