| 12345678910111213141516171819202122232425262728293031323334353637383940 |
- # hw definition file for processing by chibios_pins.py
- # for airbotf4 bootloader
- # MCU class and specific type
- MCU STM32F4xx STM32F405xx
- # board ID for firmware load
- APJ_BOARD_ID 128
- # crystal frequency
- OSCILLATOR_HZ 8000000
- STM32_PLLM_VALUE 8
- FLASH_SIZE_KB 1024
- # don't allow bootloader to use more than 16k
- FLASH_USE_MAX_KB 16
- # bootloader is installed at zero offset
- FLASH_RESERVE_START_KB 0
- # LEDs
- PB5 LED_BOOTLOADER OUTPUT LOW
- define HAL_LED_ON 0
- # the location where the bootloader will put the firmware
- FLASH_BOOTLOADER_LOAD_KB 64
- # board voltage
- STM32_VDD 330U
- # order of UARTs
- UART_ORDER OTG1
- PA11 OTG_FS_DM OTG1
- PA12 OTG_FS_DP OTG1
- define HAL_USE_EMPTY_STORAGE 1
- define HAL_STORAGE_SIZE 15360
|
