123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218 |
- /*
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- //
- // DIYDrones Custom Mediatek GPS driver for ArduPilot and ArduPilotMega.
- // Code by Michael Smith, Jordi Munoz and Jose Julio, DIYDrones.com
- //
- // GPS configuration : Custom protocol per "DIYDrones Custom Binary Sentence Specification V1.1"
- //
- #include "AP_GPS.h"
- #include "AP_GPS_MTK.h"
- // initialisation blobs to send to the GPS to try to get it into the
- // right mode
- const char AP_GPS_MTK::_initialisation_blob[] = MTK_OUTPUT_5HZ SBAS_ON WAAS_ON MTK_NAVTHRES_OFF;
- AP_GPS_MTK::AP_GPS_MTK(AP_GPS &_gps, AP_GPS::GPS_State &_state, AP_HAL::UARTDriver *_port) :
- AP_GPS_Backend(_gps, _state, _port)
- {
- gps.send_blob_start(state.instance, _initialisation_blob, sizeof(_initialisation_blob));
- }
- /*
- send an initialisation blob to configure the GPS
- */
- void AP_GPS_MTK::send_init_blob(uint8_t instance, AP_GPS &gps)
- {
- gps.send_blob_start(instance, _initialisation_blob, sizeof(_initialisation_blob));
- }
- // Process bytes available from the stream
- //
- // The stream is assumed to contain only our custom message. If it
- // contains other messages, and those messages contain the preamble bytes,
- // it is possible for this code to become de-synchronised. Without
- // buffering the entire message and re-processing it from the top,
- // this is unavoidable.
- //
- // The lack of a standard header length field makes it impossible to skip
- // unrecognised messages.
- //
- bool
- AP_GPS_MTK::read(void)
- {
- uint8_t data;
- int16_t numc;
- bool parsed = false;
- numc = port->available();
- for (int16_t i = 0; i < numc; i++) { // Process bytes received
- // read the next byte
- data = port->read();
- restart:
- switch(_step) {
- // Message preamble, class, ID detection
- //
- // If we fail to match any of the expected bytes, we
- // reset the state machine and re-consider the failed
- // byte as the first byte of the preamble. This
- // improves our chances of recovering from a mismatch
- // and makes it less likely that we will be fooled by
- // the preamble appearing as data in some other message.
- //
- case 0:
- if(PREAMBLE1 == data)
- _step++;
- break;
- case 1:
- if (PREAMBLE2 == data) {
- _step++;
- break;
- }
- _step = 0;
- goto restart;
- case 2:
- if (MESSAGE_CLASS == data) {
- _step++;
- _ck_b = _ck_a = data; // reset the checksum accumulators
- } else {
- _step = 0; // reset and wait for a message of the right class
- goto restart;
- }
- break;
- case 3:
- if (MESSAGE_ID == data) {
- _step++;
- _ck_b += (_ck_a += data);
- _payload_counter = 0;
- } else {
- _step = 0;
- goto restart;
- }
- break;
- // Receive message data
- //
- case 4:
- _buffer[_payload_counter++] = data;
- _ck_b += (_ck_a += data);
- if (_payload_counter == sizeof(_buffer))
- _step++;
- break;
- // Checksum and message processing
- //
- case 5:
- _step++;
- if (_ck_a != data) {
- _step = 0;
- }
- break;
- case 6:
- _step = 0;
- if (_ck_b != data) {
- break;
- }
- // set fix type
- if (_buffer.msg.fix_type == FIX_3D) {
- state.status = AP_GPS::GPS_OK_FIX_3D;
- }else if (_buffer.msg.fix_type == FIX_2D) {
- state.status = AP_GPS::GPS_OK_FIX_2D;
- }else{
- state.status = AP_GPS::NO_FIX;
- }
- state.location.lat = swap_int32(_buffer.msg.latitude) * 10;
- state.location.lng = swap_int32(_buffer.msg.longitude) * 10;
- state.location.alt = swap_int32(_buffer.msg.altitude);
- state.ground_speed = swap_int32(_buffer.msg.ground_speed) * 0.01f;
- state.ground_course = wrap_360(swap_int32(_buffer.msg.ground_course) * 1.0e-6f);
- state.num_sats = _buffer.msg.satellites;
- if (state.status >= AP_GPS::GPS_OK_FIX_2D) {
- make_gps_time(0, swap_int32(_buffer.msg.utc_time)*10);
- }
- // we don't change _last_gps_time as we don't know the
- // full date
- fill_3d_velocity();
- parsed = true;
- }
- }
- return parsed;
- }
- /*
- detect a MTK GPS
- */
- bool
- AP_GPS_MTK::_detect(struct MTK_detect_state &state, uint8_t data)
- {
- switch (state.step) {
- case 1:
- if (PREAMBLE2 == data) {
- state.step++;
- break;
- }
- state.step = 0;
- FALLTHROUGH;
- case 0:
- state.ck_b = state.ck_a = state.payload_counter = 0;
- if(PREAMBLE1 == data)
- state.step++;
- break;
- case 2:
- if (MESSAGE_CLASS == data) {
- state.step++;
- state.ck_b = state.ck_a = data;
- } else {
- state.step = 0;
- }
- break;
- case 3:
- if (MESSAGE_ID == data) {
- state.step++;
- state.ck_b += (state.ck_a += data);
- state.payload_counter = 0;
- } else {
- state.step = 0;
- }
- break;
- case 4:
- state.ck_b += (state.ck_a += data);
- if (++state.payload_counter == sizeof(struct diyd_mtk_msg))
- state.step++;
- break;
- case 5:
- state.step++;
- if (state.ck_a != data) {
- state.step = 0;
- }
- break;
- case 6:
- state.step = 0;
- if (state.ck_b == data) {
- return true;
- }
- }
- return false;
- }
|