/************************************************************ * AP_mount -- library to control a 2 or 3 axis mount. * * * * Author: Joe Holdsworth; * * Ritchie Wilson; * * Amilcar Lucas; * * Gregory Fletcher; * * heavily modified by Randy Mackay * * * * Purpose: Move a 2 or 3 axis mount attached to vehicle, * * Used for mount to track targets or stabilise * * camera plus other modes. * * * * Usage: Use in main code to control mounts attached to * * vehicle. * * * * Comments: All angles in degrees * 100, distances in meters* * unless otherwise stated. * ************************************************************/ #pragma once #include #include #include #include // maximum number of mounts #define AP_MOUNT_MAX_INSTANCES 1 // declare backend classes class AP_Mount_Backend; class AP_Mount_Servo; class AP_Mount_SoloGimbal; class AP_Mount_Alexmos; class AP_Mount_SToRM32; class AP_Mount_SToRM32_serial; /* This is a workaround to allow the MAVLink backend access to the SmallEKF. It would be nice to find a neater solution to this */ class AP_Mount { // declare backends as friends friend class AP_Mount_Backend; friend class AP_Mount_Servo; friend class AP_Mount_SoloGimbal; friend class AP_Mount_Alexmos; friend class AP_Mount_SToRM32; friend class AP_Mount_SToRM32_serial; public: AP_Mount(const struct Location ¤t_loc); /* Do not allow copies */ AP_Mount(const AP_Mount &other) = delete; AP_Mount &operator=(const AP_Mount&) = delete; // get singleton instance static AP_Mount *get_singleton() { return _singleton; } // Enums enum MountType { Mount_Type_None = 0, /// no mount Mount_Type_Servo = 1, /// servo controlled mount Mount_Type_SoloGimbal = 2, /// Solo's gimbal Mount_Type_Alexmos = 3, /// Alexmos mount Mount_Type_SToRM32 = 4, /// SToRM32 mount using MAVLink protocol Mount_Type_SToRM32_serial = 5 /// SToRM32 mount using custom serial protocol }; // init - detect and initialise all mounts void init(); // update - give mount opportunity to update servos. should be called at 10hz or higher void update(); // used for gimbals that need to read INS data at full rate void update_fast(); // get_mount_type - returns the type of mount AP_Mount::MountType get_mount_type() const { return get_mount_type(_primary); } AP_Mount::MountType get_mount_type(uint8_t instance) const; // has_pan_control - returns true if the mount has yaw control (required for copters) bool has_pan_control() const { return has_pan_control(_primary); } bool has_pan_control(uint8_t instance) const; // get_mode - returns current mode of mount (i.e. Retracted, Neutral, RC_Targeting, GPS Point) enum MAV_MOUNT_MODE get_mode() const { return get_mode(_primary); } enum MAV_MOUNT_MODE get_mode(uint8_t instance) const; // set_mode - sets mount's mode // returns true if mode is successfully set void set_mode(enum MAV_MOUNT_MODE mode) { return set_mode(_primary, mode); } void set_mode(uint8_t instance, enum MAV_MOUNT_MODE mode); // set_mode_to_default - restores the mode to it's default mode held in the MNT_DEFLT_MODE parameter // this operation requires 60us on a Pixhawk/PX4 void set_mode_to_default() { set_mode_to_default(_primary); } void set_mode_to_default(uint8_t instance); // set_angle_targets - sets angle targets in degrees void set_angle_targets(float roll, float tilt, float pan) { set_angle_targets(_primary, roll, tilt, pan); } void set_angle_targets(uint8_t instance, float roll, float tilt, float pan); // set_roi_target - sets target location that mount should attempt to point towards void set_roi_target(const struct Location &target_loc) { set_roi_target(_primary,target_loc); } void set_roi_target(uint8_t instance, const struct Location &target_loc); // mavlink message handling: MAV_RESULT handle_command_long(const mavlink_command_long_t &packet); void handle_param_value(const mavlink_message_t &msg); void handle_message(mavlink_channel_t chan, const mavlink_message_t &msg); // send a GIMBAL_REPORT message to GCS void send_gimbal_report(mavlink_channel_t chan); // send a MOUNT_STATUS message to GCS: void send_mount_status(mavlink_channel_t chan); // parameter var table static const struct AP_Param::GroupInfo var_info[]; protected: static AP_Mount *_singleton; // private members const struct Location &_current_loc; // reference to the vehicle's current location // frontend parameters AP_Int8 _joystick_speed; // joystick gain // front end members uint8_t _num_instances; // number of mounts instantiated uint8_t _primary; // primary mount AP_Mount_Backend *_backends[AP_MOUNT_MAX_INSTANCES]; // pointers to instantiated mounts // backend state including parameters struct mount_state { // Parameters AP_Int8 _type; // mount type (None, Servo or MAVLink, see MountType enum) AP_Int8 _default_mode; // default mode on startup and when control is returned from autopilot AP_Int8 _stab_roll; // 1 = mount should stabilize earth-frame roll axis, 0 = no stabilization AP_Int8 _stab_tilt; // 1 = mount should stabilize earth-frame pitch axis AP_Int8 _stab_pan; // 1 = mount should stabilize earth-frame yaw axis // RC input channels from receiver used for direct angular input from pilot AP_Int8 _roll_rc_in; // pilot provides roll input on this channel AP_Int8 _tilt_rc_in; // pilot provides tilt input on this channel AP_Int8 _pan_rc_in; // pilot provides pan input on this channel // Mount's physical limits AP_Int16 _roll_angle_min; // min roll in 0.01 degree units AP_Int16 _roll_angle_max; // max roll in 0.01 degree units AP_Int16 _tilt_angle_min; // min tilt in 0.01 degree units AP_Int16 _tilt_angle_max; // max tilt in 0.01 degree units AP_Int16 _pan_angle_min; // min pan in 0.01 degree units AP_Int16 _pan_angle_max; // max pan in 0.01 degree units AP_Vector3f _retract_angles; // retracted position for mount, vector.x = roll vector.y = tilt, vector.z=pan AP_Vector3f _neutral_angles; // neutral position for mount, vector.x = roll vector.y = tilt, vector.z=pan AP_Float _roll_stb_lead; // roll lead control gain AP_Float _pitch_stb_lead; // pitch lead control gain MAV_MOUNT_MODE _mode; // current mode (see MAV_MOUNT_MODE enum) struct Location _roi_target; // roi target location } state[AP_MOUNT_MAX_INSTANCES]; private: void handle_gimbal_report(mavlink_channel_t chan, const mavlink_message_t &msg); void handle_mount_configure(const mavlink_message_t &msg); void handle_mount_control(const mavlink_message_t &msg); MAV_RESULT handle_command_do_mount_configure(const mavlink_command_long_t &packet); MAV_RESULT handle_command_do_mount_control(const mavlink_command_long_t &packet); }; namespace AP { AP_Mount *mount(); };