#include "AP_Logger.h" #include "AP_Logger_Backend.h" #include "AP_Logger_File.h" #include "AP_Logger_SITL.h" #include "AP_Logger_DataFlash.h" #include "AP_Logger_MAVLink.h" #include #include AP_Logger *AP_Logger::_singleton; extern const AP_HAL::HAL& hal; #ifndef HAL_LOGGING_FILE_BUFSIZE #if HAL_MEM_CLASS >= HAL_MEM_CLASS_300 #define HAL_LOGGING_FILE_BUFSIZE 50 #else #define HAL_LOGGING_FILE_BUFSIZE 16 #endif #endif #ifndef HAL_LOGGING_MAV_BUFSIZE #define HAL_LOGGING_MAV_BUFSIZE 8 #endif #ifndef HAL_LOGGING_FILE_TIMEOUT #define HAL_LOGGING_FILE_TIMEOUT 5 #endif // by default log for 15 seconds after disarming #ifndef HAL_LOGGER_ARM_PERSIST #define HAL_LOGGER_ARM_PERSIST 15 #endif #ifndef HAL_LOGGING_BACKENDS_DEFAULT # ifdef HAL_LOGGING_DATAFLASH # define HAL_LOGGING_BACKENDS_DEFAULT Backend_Type::BLOCK # else # define HAL_LOGGING_BACKENDS_DEFAULT Backend_Type::FILESYSTEM # endif #endif const AP_Param::GroupInfo AP_Logger::var_info[] = { // @Param: _BACKEND_TYPE // @DisplayName: AP_Logger Backend Storage type // @Description: Bitmap of what Logger backend types to enable. Block-based logging is available on SITL and boards with dataflash chips. Multiple backends can be selected. // @Values: 0:None,1:File,2:MAVLink,3:File and MAVLink,4:Block,6:Block and MAVLink // @Bitmask: 0:File,1:MAVLink,2:Block // @User: Standard AP_GROUPINFO("_BACKEND_TYPE", 0, AP_Logger, _params.backend_types, uint8_t(HAL_LOGGING_BACKENDS_DEFAULT)), // @Param: _FILE_BUFSIZE // @DisplayName: Maximum AP_Logger File Backend buffer size (in kilobytes) // @Description: The AP_Logger_File backend uses a buffer to store data before writing to the block device. Raising this value may reduce "gaps" in your SD card logging. This buffer size may be reduced depending on available memory. PixHawk requires at least 4 kilobytes. Maximum value available here is 64 kilobytes. // @User: Standard AP_GROUPINFO("_FILE_BUFSIZE", 1, AP_Logger, _params.file_bufsize, HAL_LOGGING_FILE_BUFSIZE), // @Param: _DISARMED // @DisplayName: Enable logging while disarmed // @Description: If LOG_DISARMED is set to 1 then logging will be enabled while disarmed. This can make for very large logfiles but can help a lot when tracking down startup issues // @Values: 0:Disabled,1:Enabled // @User: Standard AP_GROUPINFO("_DISARMED", 2, AP_Logger, _params.log_disarmed, 0), // @Param: _REPLAY // @DisplayName: Enable logging of information needed for Replay // @Description: If LOG_REPLAY is set to 1 then the EKF2 state estimator will log detailed information needed for diagnosing problems with the Kalman filter. It is suggested that you also raise LOG_FILE_BUFSIZE to give more buffer space for logging and use a high quality microSD card to ensure no sensor data is lost // @Values: 0:Disabled,1:Enabled // @User: Standard AP_GROUPINFO("_REPLAY", 3, AP_Logger, _params.log_replay, 0), // @Param: _FILE_DSRMROT // @DisplayName: Stop logging to current file on disarm // @Description: When set, the current log file is closed when the vehicle is disarmed. If LOG_DISARMED is set then a fresh log will be opened. // @Values: 0:Disabled,1:Enabled // @User: Standard AP_GROUPINFO("_FILE_DSRMROT", 4, AP_Logger, _params.file_disarm_rot, 0), // @Param: _MAV_BUFSIZE // @DisplayName: Maximum AP_Logger MAVLink Backend buffer size // @Description: Maximum amount of memory to allocate to AP_Logger-over-mavlink // @User: Advanced // @Units: kB AP_GROUPINFO("_MAV_BUFSIZE", 5, AP_Logger, _params.mav_bufsize, HAL_LOGGING_MAV_BUFSIZE), // @Param: _FILE_TIMEOUT // @DisplayName: Timeout before giving up on file writes // @Description: This controls the amount of time before failing writes to a log file cause the file to be closed and logging stopped. // @User: Standard // @Units: s AP_GROUPINFO("_FILE_TIMEOUT", 6, AP_Logger, _params.file_timeout, HAL_LOGGING_FILE_TIMEOUT), AP_GROUPEND }; #define streq(x, y) (!strcmp(x, y)) AP_Logger::AP_Logger(const AP_Int32 &log_bitmask) : _log_bitmask(log_bitmask) { AP_Param::setup_object_defaults(this, var_info); if (_singleton != nullptr) { AP_HAL::panic("AP_Logger must be singleton"); } _singleton = this; } void AP_Logger::Init(const struct LogStructure *structures, uint8_t num_types) { gcs().send_text(MAV_SEVERITY_INFO, "Preparing log system"); if (hal.util->was_watchdog_armed()) { gcs().send_text(MAV_SEVERITY_INFO, "Forcing logging for watchdog reset"); _params.log_disarmed.set(1); } #if CONFIG_HAL_BOARD == HAL_BOARD_SITL validate_structures(structures, num_types); dump_structures(structures, num_types); #endif if (_next_backend == LOGGER_MAX_BACKENDS) { AP_HAL::panic("Too many backends"); return; } _num_types = num_types; _structures = structures; #if defined(HAL_BOARD_LOG_DIRECTORY) && HAVE_FILESYSTEM_SUPPORT if (_params.backend_types & uint8_t(Backend_Type::FILESYSTEM)) { LoggerMessageWriter_DFLogStart *message_writer = new LoggerMessageWriter_DFLogStart(); if (message_writer != nullptr) { backends[_next_backend] = new AP_Logger_File(*this, message_writer, HAL_BOARD_LOG_DIRECTORY); } if (backends[_next_backend] == nullptr) { hal.console->printf("Unable to open AP_Logger_File"); } else { _next_backend++; } } #endif // HAVE_FILESYSTEM_SUPPORT #if LOGGER_MAVLINK_SUPPORT if (_params.backend_types & uint8_t(Backend_Type::MAVLINK)) { if (_next_backend == LOGGER_MAX_BACKENDS) { AP_HAL::panic("Too many backends"); return; } LoggerMessageWriter_DFLogStart *message_writer = new LoggerMessageWriter_DFLogStart(); if (message_writer != nullptr) { backends[_next_backend] = new AP_Logger_MAVLink(*this, message_writer); } if (backends[_next_backend] == nullptr) { hal.console->printf("Unable to open AP_Logger_MAVLink"); } else { _next_backend++; } } #endif #if CONFIG_HAL_BOARD == HAL_BOARD_SITL if (_params.backend_types & uint8_t(Backend_Type::BLOCK)) { if (_next_backend == LOGGER_MAX_BACKENDS) { AP_HAL::panic("Too many backends"); return; } LoggerMessageWriter_DFLogStart *message_writer = new LoggerMessageWriter_DFLogStart(); if (message_writer != nullptr) { backends[_next_backend] = new AP_Logger_SITL(*this, message_writer); } if (backends[_next_backend] == nullptr) { hal.console->printf("Unable to open AP_Logger_SITL"); } else { _next_backend++; } } #endif #ifdef HAL_LOGGING_DATAFLASH if (_params.backend_types & uint8_t(Backend_Type::BLOCK)) { if (_next_backend == LOGGER_MAX_BACKENDS) { AP_HAL::panic("Too many backends"); return; } LoggerMessageWriter_DFLogStart *message_writer = new LoggerMessageWriter_DFLogStart(); if (message_writer != nullptr) { backends[_next_backend] = new AP_Logger_DataFlash(*this, message_writer); } if (backends[_next_backend] == nullptr) { hal.console->printf("Unable to open AP_Logger_DataFlash"); } else { _next_backend++; } } #endif for (uint8_t i=0; i<_next_backend; i++) { backends[i]->Init(); } Prep(); EnableWrites(true); gcs().send_text(MAV_SEVERITY_INFO, "Prepared log system"); } #if CONFIG_HAL_BOARD == HAL_BOARD_SITL #include #define DEBUG_LOG_STRUCTURES 0 extern const AP_HAL::HAL& hal; #define Debug(fmt, args ...) do {::fprintf(stderr, "%s:%d: " fmt "\n", __FUNCTION__, __LINE__, ## args); } while(0) /// return the number of commas present in string static uint8_t count_commas(const char *string) { uint8_t ret = 0; for (uint8_t i=0; iunits[fieldnum]), multiplier_name(logstructure->multipliers[fieldnum])); } /// pretty-print log structures /// @note structures MUST be well-formed void AP_Logger::dump_structures(const struct LogStructure *logstructures, const uint8_t num_types) { #if DEBUG_LOG_STRUCTURES for (uint16_t i=0; iname); char label[32] = { }; uint8_t labeloffset = 0; int8_t fieldnum = 0; for (uint8_t j=0; jlabels); j++) { char labelchar = logstructure->labels[j]; if (labelchar == '\0') { break; } if (labelchar == ',') { dump_structure_field(logstructure, label, fieldnum); fieldnum++; labeloffset = 0; memset(label, '\0', 32); } else { label[labeloffset++] = labelchar; } } dump_structure_field(logstructure, label, fieldnum); ::fprintf(stderr, "\n"); // just add a CR to the output } #endif } bool AP_Logger::validate_structure(const struct LogStructure *logstructure, const int16_t offset) { bool passed = true; #if DEBUG_LOG_STRUCTURES Debug("offset=%d ID=%d NAME=%s", offset, logstructure->msg_type, logstructure->name); #endif // fields must be null-terminated #define CHECK_ENTRY(fieldname,fieldname_s,fieldlen) \ do { \ if (strnlen(logstructure->fieldname, fieldlen) > fieldlen-1) { \ Debug(" Message " fieldname_s " not NULL-terminated or too long"); \ passed = false; \ } \ } while (false) CHECK_ENTRY(name, "name", LS_NAME_SIZE); CHECK_ENTRY(format, "format", LS_FORMAT_SIZE); CHECK_ENTRY(labels, "labels", LS_LABELS_SIZE); CHECK_ENTRY(units, "units", LS_UNITS_SIZE); CHECK_ENTRY(multipliers, "multipliers", LS_MULTIPLIERS_SIZE); #undef CHECK_ENTRY // ensure each message ID is only used once if (seen_ids[logstructure->msg_type]) { Debug(" ID %d used twice (LogStructure offset=%d)", logstructure->msg_type, offset); passed = false; } seen_ids[logstructure->msg_type] = true; // ensure we have enough labels to cover columns uint8_t fieldcount = strlen(logstructure->format); uint8_t labelcount = count_commas(logstructure->labels)+1; if (fieldcount != labelcount) { Debug(" fieldcount=%u does not match labelcount=%u", fieldcount, labelcount); passed = false; } // check that the structure is of an appropriate length to take fields const int16_t msg_len = Write_calc_msg_len(logstructure->format); if (msg_len != logstructure->msg_len) { Debug(" Calculated message length for (%s) based on format field (%s) does not match structure size (%d != %u)", logstructure->name, logstructure->format, msg_len, logstructure->msg_len); passed = false; } // ensure we have units for each field: if (strlen(logstructure->units) != fieldcount) { Debug(" fieldcount=%u does not match unitcount=%u", (unsigned)fieldcount, (unsigned)strlen(logstructure->units)); passed = false; } // ensure we have multipliers for each field if (strlen(logstructure->multipliers) != fieldcount) { Debug(" fieldcount=%u does not match multipliercount=%u", (unsigned)fieldcount, (unsigned)strlen(logstructure->multipliers)); passed = false; } // ensure the FMTU messages reference valid units for (uint8_t j=0; junits); j++) { char logunit = logstructure->units[j]; uint8_t k; for (k=0; k<_num_units; k++) { if (logunit == _units[k].ID) { // found this one break; } } if (k == _num_units) { Debug(" invalid unit=%c", logunit); passed = false; } } // ensure the FMTU messages reference valid multipliers for (uint8_t j=0; jmultipliers); j++) { char logmultiplier = logstructure->multipliers[j]; uint8_t k; for (k=0; k<_num_multipliers; k++) { if (logmultiplier == _multipliers[k].ID) { // found this one break; } } if (k == _num_multipliers) { Debug(" invalid multiplier=%c", logmultiplier); passed = false; } } // ensure any float has a multiplier of zero if (false && passed) { for (uint8_t j=0; jmultipliers); j++) { const char fmt = logstructure->format[j]; if (fmt != 'f') { continue; } const char logmultiplier = logstructure->multipliers[j]; if (logmultiplier == '0' || logmultiplier == '?' || logmultiplier == '-') { continue; } Debug(" %s[%u] float with non-zero multiplier=%c", logstructure->name, j, logmultiplier); passed = false; } } return passed; } void AP_Logger::validate_structures(const struct LogStructure *logstructures, const uint8_t num_types) { Debug("Validating structures"); bool passed = true; for (uint16_t i=0; ilogging_enabled()) { return true; } } return false; } bool AP_Logger::logging_failed() const { if (_next_backend < 1) { // we should not have been called! return true; } for (uint8_t i=0; i<_next_backend; i++) { if (backends[i]->logging_failed()) { return true; } } return false; } void AP_Logger::Write_MessageF(const char *fmt, ...) { char msg[65] {}; // sizeof(log_Message.msg) + null-termination va_list ap; va_start(ap, fmt); hal.util->vsnprintf(msg, sizeof(msg), fmt, ap); va_end(ap); Write_Message(msg); } void AP_Logger::backend_starting_new_log(const AP_Logger_Backend *backend) { for (uint8_t i=0; i<_next_backend; i++) { if (backends[i] == backend) { // pointer comparison! // reset sent masks for (struct log_write_fmt *f = log_write_fmts; f; f=f->next) { f->sent_mask &= ~(1<methodcall; \ } \ } while (0) void AP_Logger::PrepForArming() { FOR_EACH_BACKEND(PrepForArming()); } void AP_Logger::setVehicle_Startup_Writer(vehicle_startup_message_Writer writer) { _vehicle_messages = writer; } void AP_Logger::set_vehicle_armed(const bool armed_state) { if (armed_state == _armed) { // no change in status return; } _armed = armed_state; if (!_armed) { // went from armed to disarmed FOR_EACH_BACKEND(vehicle_was_disarmed()); } } // start functions pass straight through to backend: void AP_Logger::WriteBlock(const void *pBuffer, uint16_t size) { FOR_EACH_BACKEND(WriteBlock(pBuffer, size)); } void AP_Logger::WriteCriticalBlock(const void *pBuffer, uint16_t size) { FOR_EACH_BACKEND(WriteCriticalBlock(pBuffer, size)); } void AP_Logger::WritePrioritisedBlock(const void *pBuffer, uint16_t size, bool is_critical) { FOR_EACH_BACKEND(WritePrioritisedBlock(pBuffer, size, is_critical)); } // change me to "DoTimeConsumingPreparations"? void AP_Logger::EraseAll() { FOR_EACH_BACKEND(EraseAll()); } // change me to "LoggingAvailable"? bool AP_Logger::CardInserted(void) { for (uint8_t i=0; i< _next_backend; i++) { if (backends[i]->CardInserted()) { return true; } } return false; } void AP_Logger::Prep() { FOR_EACH_BACKEND(Prep()); } void AP_Logger::StopLogging() { FOR_EACH_BACKEND(stop_logging()); } uint16_t AP_Logger::find_last_log() const { if (_next_backend == 0) { return 0; } return backends[0]->find_last_log(); } void AP_Logger::get_log_boundaries(uint16_t log_num, uint32_t & start_page, uint32_t & end_page) { if (_next_backend == 0) { return; } backends[0]->get_log_boundaries(log_num, start_page, end_page); } void AP_Logger::get_log_info(uint16_t log_num, uint32_t &size, uint32_t &time_utc) { if (_next_backend == 0) { return; } backends[0]->get_log_info(log_num, size, time_utc); } int16_t AP_Logger::get_log_data(uint16_t log_num, uint16_t page, uint32_t offset, uint16_t len, uint8_t *data) { if (_next_backend == 0) { return 0; } return backends[0]->get_log_data(log_num, page, offset, len, data); } uint16_t AP_Logger::get_num_logs(void) { if (_next_backend == 0) { return 0; } return backends[0]->get_num_logs(); } /* we're started if any of the backends are started */ bool AP_Logger::logging_started(void) { for (uint8_t i=0; i< _next_backend; i++) { if (backends[i]->logging_started()) { return true; } } return false; } void AP_Logger::handle_mavlink_msg(GCS_MAVLINK &link, const mavlink_message_t &msg) { switch (msg.msgid) { case MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS: FOR_EACH_BACKEND(remote_log_block_status_msg(link.get_chan(), msg)); break; case MAVLINK_MSG_ID_LOG_REQUEST_LIST: FALLTHROUGH; case MAVLINK_MSG_ID_LOG_REQUEST_DATA: FALLTHROUGH; case MAVLINK_MSG_ID_LOG_ERASE: FALLTHROUGH; case MAVLINK_MSG_ID_LOG_REQUEST_END: handle_log_message(link, msg); break; } } void AP_Logger::periodic_tasks() { handle_log_send(); FOR_EACH_BACKEND(periodic_tasks()); } #if CONFIG_HAL_BOARD == HAL_BOARD_SITL || CONFIG_HAL_BOARD == HAL_BOARD_LINUX // currently only AP_Logger_File support this: void AP_Logger::flush(void) { FOR_EACH_BACKEND(flush()); } #endif void AP_Logger::Write_EntireMission() { FOR_EACH_BACKEND(Write_EntireMission()); } void AP_Logger::Write_Message(const char *message) { FOR_EACH_BACKEND(Write_Message(message)); } void AP_Logger::Write_Mode(uint8_t mode, uint8_t reason) { FOR_EACH_BACKEND(Write_Mode(mode, reason)); } void AP_Logger::Write_Parameter(const char *name, float value) { FOR_EACH_BACKEND(Write_Parameter(name, value)); } void AP_Logger::Write_Mission_Cmd(const AP_Mission &mission, const AP_Mission::Mission_Command &cmd) { FOR_EACH_BACKEND(Write_Mission_Cmd(mission, cmd)); } void AP_Logger::Write_RallyPoint(uint8_t total, uint8_t sequence, const RallyLocation &rally_point) { FOR_EACH_BACKEND(Write_RallyPoint(total, sequence, rally_point)); } void AP_Logger::Write_Rally() { FOR_EACH_BACKEND(Write_Rally()); } uint32_t AP_Logger::num_dropped() const { if (_next_backend == 0) { return 0; } return backends[0]->num_dropped(); } // end functions pass straight through to backend /* Write support */ void AP_Logger::Write(const char *name, const char *labels, const char *fmt, ...) { va_list arg_list; va_start(arg_list, fmt); WriteV(name, labels, nullptr, nullptr, fmt, arg_list); va_end(arg_list); } void AP_Logger::Write(const char *name, const char *labels, const char *units, const char *mults, const char *fmt, ...) { va_list arg_list; va_start(arg_list, fmt); WriteV(name, labels, units, mults, fmt, arg_list); va_end(arg_list); } void AP_Logger::WriteCritical(const char *name, const char *labels, const char *fmt, ...) { va_list arg_list; va_start(arg_list, fmt); WriteV(name, labels, nullptr, nullptr, fmt, arg_list, true); va_end(arg_list); } void AP_Logger::WriteCritical(const char *name, const char *labels, const char *units, const char *mults, const char *fmt, ...) { va_list arg_list; va_start(arg_list, fmt); WriteV(name, labels, units, mults, fmt, arg_list, true); va_end(arg_list); } void AP_Logger::WriteV(const char *name, const char *labels, const char *units, const char *mults, const char *fmt, va_list arg_list, bool is_critical) { struct log_write_fmt *f = msg_fmt_for_name(name, labels, units, mults, fmt); if (f == nullptr) { // unable to map name to a messagetype; could be out of // msgtypes, could be out of slots, ... AP::internalerror().error(AP_InternalError::error_t::logger_mapfailure); return; } for (uint8_t i=0; i<_next_backend; i++) { if (!(f->sent_mask & (1U<Write_Emit_FMT(f->msg_type)) { continue; } f->sent_mask |= (1U<Write(f->msg_type, arg_copy, is_critical); va_end(arg_copy); } } #if CONFIG_HAL_BOARD == HAL_BOARD_SITL void AP_Logger::assert_same_fmt_for_name(const AP_Logger::log_write_fmt *f, const char *name, const char *labels, const char *units, const char *mults, const char *fmt) const { bool passed = true; if (!streq(f->name, name)) { // why exactly were we called?! Debug("format names differ (%s) != (%s)", f->name, name); passed = false; } if (!streq(f->labels, labels)) { Debug("format labels differ (%s) vs (%s)", f->labels, labels); passed = false; } if ((f->units != nullptr && units == nullptr) || (f->units == nullptr && units != nullptr) || (units !=nullptr && !streq(f->units, units))) { Debug("format units differ (%s) vs (%s)", (f->units ? f->units : "nullptr"), (units ? units : "nullptr")); passed = false; } if ((f->mults != nullptr && mults == nullptr) || (f->mults == nullptr && mults != nullptr) || (mults != nullptr && !streq(f->mults, mults))) { Debug("format mults differ (%s) vs (%s)", (f->mults ? f->mults : "nullptr"), (mults ? mults : "nullptr")); passed = false; } if (!streq(f->fmt, fmt)) { Debug("format fmt differ (%s) vs (%s)", (f->fmt ? f->fmt : "nullptr"), (fmt ? fmt : "nullptr")); passed = false; } if (!passed) { Debug("Format definition must be consistent for every call of Write"); abort(); } } #endif AP_Logger::log_write_fmt *AP_Logger::msg_fmt_for_name(const char *name, const char *labels, const char *units, const char *mults, const char *fmt) { struct log_write_fmt *f; for (f = log_write_fmts; f; f=f->next) { if (f->name == name) { // ptr comparison // already have an ID for this name: #if CONFIG_HAL_BOARD == HAL_BOARD_SITL assert_same_fmt_for_name(f, name, labels, units, mults, fmt); #endif return f; } } f = (struct log_write_fmt *)calloc(1, sizeof(*f)); if (f == nullptr) { // out of memory return nullptr; } // no message type allocated for this name. Try to allocate one: int16_t msg_type = find_free_msg_type(); if (msg_type == -1) { free(f); return nullptr; } f->msg_type = msg_type; f->name = name; f->fmt = fmt; f->labels = labels; f->units = units; f->mults = mults; int16_t tmp = Write_calc_msg_len(fmt); if (tmp == -1) { free(f); return nullptr; } f->msg_len = tmp; // add to front of list f->next = log_write_fmts; log_write_fmts = f; #if CONFIG_HAL_BOARD == HAL_BOARD_SITL char ls_name[LS_NAME_SIZE] = {}; char ls_format[LS_FORMAT_SIZE] = {}; char ls_labels[LS_LABELS_SIZE] = {}; char ls_units[LS_UNITS_SIZE] = {}; char ls_multipliers[LS_MULTIPLIERS_SIZE] = {}; struct LogStructure ls = { f->msg_type, f->msg_len, ls_name, ls_format, ls_labels, ls_units, ls_multipliers }; memcpy((char*)ls_name, f->name, MIN(sizeof(ls_name), strlen(f->name))); memcpy((char*)ls_format, f->fmt, MIN(sizeof(ls_format), strlen(f->fmt))); memcpy((char*)ls_labels, f->labels, MIN(sizeof(ls_labels), strlen(f->labels))); if (f->units != nullptr) { memcpy((char*)ls_units, f->units, MIN(sizeof(ls_units), strlen(f->units))); } else { memset((char*)ls_units, '?', MIN(sizeof(ls_format), strlen(f->fmt))); } if (f->mults != nullptr) { memcpy((char*)ls_multipliers, f->mults, MIN(sizeof(ls_multipliers), strlen(f->mults))); } else { memset((char*)ls_multipliers, '?', MIN(sizeof(ls_format), strlen(f->fmt))); } if (!validate_structure(&ls, (int16_t)-1)) { Debug("Log structure invalid"); abort(); } #endif return f; } const struct LogStructure *AP_Logger::structure_for_msg_type(const uint8_t msg_type) { for (uint16_t i=0; i<_num_types;i++) { const struct LogStructure *s = structure(i); if (s->msg_type == msg_type) { // in use return s; } } return nullptr; } const struct AP_Logger::log_write_fmt *AP_Logger::log_write_fmt_for_msg_type(const uint8_t msg_type) const { struct log_write_fmt *f; for (f = log_write_fmts; f; f=f->next) { if (f->msg_type == msg_type) { return f; } } return nullptr; } // returns true if the msg_type is already taken bool AP_Logger::msg_type_in_use(const uint8_t msg_type) const { // check static list of messages (e.g. from LOG_BASE_STRUCTURES) // check the write format types to see if we've used this one for (uint16_t i=0; i<_num_types;i++) { if (structure(i)->msg_type == msg_type) { // in use return true; } } struct log_write_fmt *f; for (f = log_write_fmts; f; f=f->next) { if (f->msg_type == msg_type) { return true; } } return false; } // find a free message type int16_t AP_Logger::find_free_msg_type() const { // avoid using 255 here; perhaps we want to use it to extend things later for (uint16_t msg_type=254; msg_type>0; msg_type--) { // more likely to be free at end if (! msg_type_in_use(msg_type)) { return msg_type; } } return -1; } /* * It is assumed that logstruct's char* variables are valid strings of * maximum lengths for those fields (given in LogStructure.h e.g. LS_NAME_SIZE) */ bool AP_Logger::fill_log_write_logstructure(struct LogStructure &logstruct, const uint8_t msg_type) const { // find log structure information corresponding to msg_type: struct log_write_fmt *f; for (f = log_write_fmts; f; f=f->next) { if(f->msg_type == msg_type) { break; } } if (!f) { return false; } logstruct.msg_type = msg_type; strncpy((char*)logstruct.name, f->name, LS_NAME_SIZE); strncpy((char*)logstruct.format, f->fmt, LS_FORMAT_SIZE); strncpy((char*)logstruct.labels, f->labels, LS_LABELS_SIZE); if (f->units != nullptr) { strncpy((char*)logstruct.units, f->units, LS_UNITS_SIZE); } else { memset((char*)logstruct.units, '\0', LS_UNITS_SIZE); memset((char*)logstruct.units, '?', MIN(LS_UNITS_SIZE,strlen(logstruct.format))); } if (f->mults != nullptr) { strncpy((char*)logstruct.multipliers, f->mults, LS_MULTIPLIERS_SIZE); } else { memset((char*)logstruct.multipliers, '\0', LS_MULTIPLIERS_SIZE); memset((char*)logstruct.multipliers, '?', MIN(LS_MULTIPLIERS_SIZE, strlen(logstruct.format))); // special magic to set units/mults for TimeUS, by far and // away the most common first field if (!strncmp(logstruct.labels, "TimeUS,", MIN(LS_LABELS_SIZE, strlen("TimeUS,")))) { ((char*)(logstruct.units))[0] = 's'; ((char*)(logstruct.multipliers))[0] = 'F'; } } logstruct.msg_len = f->msg_len; return true; } /* calculate the length of output of a format string. Note that this * returns an int16_t; if it returns -1 then an error has occurred. * This was mechanically converted from init_field_types in * Tools/Replay/MsgHandler.cpp */ int16_t AP_Logger::Write_calc_msg_len(const char *fmt) const { uint8_t len = LOG_PACKET_HEADER_LEN; for (uint8_t i=0; iWriteBlock(&pkt, sizeof(pkt)); } return backends[0]->WriteBlock(&pkt, sizeof(pkt)); } // Write a series of IMU readings to log: bool AP_Logger::Write_ISBD(const uint16_t isb_seqno, const uint16_t seqno, const int16_t x[32], const int16_t y[32], const int16_t z[32]) { if (_next_backend == 0) { return false; } struct log_ISBD pkt = { LOG_PACKET_HEADER_INIT(LOG_ISBD_MSG), time_us : AP_HAL::micros64(), isb_seqno : isb_seqno, seqno : seqno }; memcpy(pkt.x, x, sizeof(pkt.x)); memcpy(pkt.y, y, sizeof(pkt.y)); memcpy(pkt.z, z, sizeof(pkt.z)); // only the first backend need succeed for us to be successful for (uint8_t i=1; i<_next_backend; i++) { backends[i]->WriteBlock(&pkt, sizeof(pkt)); } return backends[0]->WriteBlock(&pkt, sizeof(pkt)); } // Wrote an event packet void AP_Logger::Write_Event(Log_Event id) { const struct log_Event pkt{ LOG_PACKET_HEADER_INIT(LOG_EVENT_MSG), time_us : AP_HAL::micros64(), id : id }; WriteCriticalBlock(&pkt, sizeof(pkt)); } // Write an error packet void AP_Logger::Write_Error(LogErrorSubsystem sub_system, LogErrorCode error_code) { const struct log_Error pkt{ LOG_PACKET_HEADER_INIT(LOG_ERROR_MSG), time_us : AP_HAL::micros64(), sub_system : uint8_t(sub_system), error_code : uint8_t(error_code), }; WriteCriticalBlock(&pkt, sizeof(pkt)); } /* return true if we should log while disarmed */ bool AP_Logger::log_while_disarmed(void) const { if (_force_log_disarmed) { return true; } if (_params.log_disarmed != 0) { return true; } uint32_t now = AP_HAL::millis(); uint32_t persist_ms = HAL_LOGGER_ARM_PERSIST*1000U; // keep logging for HAL_LOGGER_ARM_PERSIST seconds after disarming const uint32_t arm_change_ms = hal.util->get_last_armed_change(); if (!hal.util->get_soft_armed() && arm_change_ms != 0 && now - arm_change_ms < persist_ms) { return true; } // keep logging for HAL_LOGGER_ARM_PERSIST seconds after an arming failure if (_last_arming_failure_ms && now - _last_arming_failure_ms < persist_ms) { return true; } return false; } namespace AP { AP_Logger &logger() { return *AP_Logger::get_singleton(); } };