/* * This file is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, * or (at your option) any later version. * * This file is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #pragma once #include #include #include #include "AP_HAL_ChibiOS.h" #if HAL_USE_SPI == TRUE #include "Semaphores.h" #include "Scheduler.h" #include "Device.h" namespace ChibiOS { class SPIBus : public DeviceBus { public: SPIBus(uint8_t bus); struct spi_dev_s *dev; uint8_t bus; SPIConfig spicfg; void dma_allocate(Shared_DMA *ctx); void dma_deallocate(Shared_DMA *ctx); bool spi_started; uint8_t slowdown; // we need an additional lock in the dma_allocate and // dma_deallocate functions to cope with 3-way contention as we // have two DMA channels that we are handling with the shared_dma // code mutex_t dma_lock; }; struct SPIDesc { SPIDesc(const char *_name, uint8_t _bus, uint8_t _device, ioline_t _pal_line, uint32_t _mode, uint32_t _lowspeed, uint32_t _highspeed) : name(_name), bus(_bus), device(_device), pal_line(_pal_line), mode(_mode), lowspeed(_lowspeed), highspeed(_highspeed) { } const char *name; uint8_t bus; uint8_t device; ioline_t pal_line; uint32_t mode; uint32_t lowspeed; uint32_t highspeed; }; class SPIDevice : public AP_HAL::SPIDevice { public: SPIDevice(SPIBus &_bus, SPIDesc &_device_desc); virtual ~SPIDevice(); /* See AP_HAL::Device::set_speed() */ bool set_speed(AP_HAL::Device::Speed speed) override; /* See AP_HAL::Device::transfer() */ bool transfer(const uint8_t *send, uint32_t send_len, uint8_t *recv, uint32_t recv_len) override; /* See AP_HAL::SPIDevice::transfer_fullduplex() */ bool transfer_fullduplex(const uint8_t *send, uint8_t *recv, uint32_t len) override; /* * send N bytes of clock pulses without taking CS. This is used * when initialising microSD interfaces over SPI */ bool clock_pulse(uint32_t len) override; /* See AP_HAL::Device::get_semaphore() */ AP_HAL::Semaphore *get_semaphore() override; /* See AP_HAL::Device::register_periodic_callback() */ AP_HAL::Device::PeriodicHandle register_periodic_callback( uint32_t period_usec, AP_HAL::Device::PeriodicCb) override; /* See AP_HAL::Device::adjust_periodic_callback() */ bool adjust_periodic_callback(AP_HAL::Device::PeriodicHandle h, uint32_t period_usec) override; bool set_chip_select(bool set) override; bool acquire_bus(bool acquire, bool skip_cs); SPIDriver * get_driver(); #ifdef HAL_SPI_CHECK_CLOCK_FREQ // used to measure clock frequencies static void test_clock_freq(void); #endif // setup a bus clock slowdown factor void set_slowdown(uint8_t slowdown) override; private: SPIBus &bus; SPIDesc &device_desc; uint32_t frequency; uint32_t freq_flag; uint32_t freq_flag_low; uint32_t freq_flag_high; char *pname; bool cs_forced; static void *spi_thread(void *arg); static uint32_t derive_freq_flag_bus(uint8_t busid, uint32_t _frequency); uint32_t derive_freq_flag(uint32_t _frequency); // low level transfer function bool do_transfer(const uint8_t *send, uint8_t *recv, uint32_t len) WARN_IF_UNUSED; }; class SPIDeviceManager : public AP_HAL::SPIDeviceManager { public: friend class SPIDevice; static SPIDeviceManager *from(AP_HAL::SPIDeviceManager *spi_mgr) { return static_cast(spi_mgr); } AP_HAL::OwnPtr get_device(const char *name) override; private: static SPIDesc device_table[]; SPIBus *buses; }; } #endif // HAL_USE_SPI