danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
..
.cproject 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
.project 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
Makefile 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
chconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
halconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
main.c 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
mcuconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren
readme.txt 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 vor 2 Jahren

readme.txt

*****************************************************************************
** ChibiOS/HAL - UART driver demo for STM32L1xx. **
*****************************************************************************

** TARGET **

The demo runs on an STMicroelectronics STM32L-Discovery board.

** The Demo **

The application demonstrates the use of the STM32L1xx UART driver.

** Board Setup **

- Remove the LCD module.
- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com