wangdan/N3_sub

danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6		%!s(int64=2) %!d(string=hai) anos
..
Makefile	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
chconf.h	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
halconf.h	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
main.c	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mcuconf.h	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
readme.txt	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos

		
				readme.txt
			
				*****************************************************************************
** ChibiOS/RT I2C test on Atmel AVR ATmega1280.                            **
*****************************************************************************

** TARGET **

The test demo runs on an Arduino Mega board.

** The Demo **

This test blinks the onboard LED and also writes/reads to a 24C64 connected
to the I2C pins (PD0/PD1 on the ATmega1280). There's no feedback provided but
the I2C can easily be analyzed with any logic analyzer or sniffing with a
buspirate or similar device.

** Build Procedure **

The demo was built using the GCC AVR toolchain.