danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 năm trước cách đây | |
|---|---|---|
| .. | ||
| cfg | 2 năm trước cách đây | |
| .cproject | 2 năm trước cách đây | |
| .project | 2 năm trước cách đây | |
| Makefile | 2 năm trước cách đây | |
| main.c | 2 năm trước cách đây | |
| readme.txt | 2 năm trước cách đây | |
readme.txt
*****************************************************************************
** ChibiOS/RT port for x86 into a Win32 process **
*****************************************************************************
** TARGET **
The demo runs under any Windows version as an application program. The serial
I/O is simulated over TCP/IP sockets.
** The Demo **
The demo listens on the two serial ports, when a connection is detected a
thread is started that serves a small command shell.
The demo shows how to create/terminate threads at runtime, how to listen to
events, how to work with serial ports, how to use the messages.
You can develop your ChibiOS/RT application using this demo as a simulator
then you can recompile it for a different architecture.
See demo.c for details.
** Build Procedure **
The demo was built using the MinGW toolchain.
** Connect to the demo **
In order to connect to the demo a telnet client is required. A good choice
is PuTTY:
http://www.putty.org/
Host Name: 127.0.0.1
Port: 29001 and/or 29002
Connection Type: Raw
** ChibiOS/RT port for x86 into a Win32 process **
*****************************************************************************
** TARGET **
The demo runs under any Windows version as an application program. The serial
I/O is simulated over TCP/IP sockets.
** The Demo **
The demo listens on the two serial ports, when a connection is detected a
thread is started that serves a small command shell.
The demo shows how to create/terminate threads at runtime, how to listen to
events, how to work with serial ports, how to use the messages.
You can develop your ChibiOS/RT application using this demo as a simulator
then you can recompile it for a different architecture.
See demo.c for details.
** Build Procedure **
The demo was built using the MinGW toolchain.
** Connect to the demo **
In order to connect to the demo a telnet client is required. A good choice
is PuTTY:
http://www.putty.org/
Host Name: 127.0.0.1
Port: 29001 and/or 29002
Connection Type: Raw