danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 tahun lalu | |
|---|---|---|
| .. | ||
| cfg | 2 tahun lalu | |
| debug | 2 tahun lalu | |
| .cproject | 2 tahun lalu | |
| .project | 2 tahun lalu | |
| Makefile | 2 tahun lalu | |
| main.c | 2 tahun lalu | |
| readme.txt | 2 tahun lalu | |
readme.txt
*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F446. **
*****************************************************************************
** TARGET **
The demo runs on an STM32 Nucleo64-F446RE board.
** The Demo **
The demo flashes the board LEDs using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD3 (USART3, mapped on STLink v2-1 Virtual COM Port).
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com
** ChibiOS/RT port for ARM-Cortex-M4 STM32F446. **
*****************************************************************************
** TARGET **
The demo runs on an STM32 Nucleo64-F446RE board.
** The Demo **
The demo flashes the board LEDs using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD3 (USART3, mapped on STLink v2-1 Virtual COM Port).
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com