123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175 |
- /*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- */
- #ifndef MCUCONF_H
- #define MCUCONF_H
- /*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
- #define STM32F0xx_MCUCONF
- /*
- * HAL driver system settings.
- */
- #define STM32_NO_INIT FALSE
- #define STM32_PVD_ENABLE FALSE
- #define STM32_PLS STM32_PLS_LEV0
- #define STM32_HSI_ENABLED TRUE
- #define STM32_HSI14_ENABLED TRUE
- #define STM32_LSI_ENABLED TRUE
- #define STM32_HSE_ENABLED FALSE
- #define STM32_LSE_ENABLED FALSE
- #define STM32_SW STM32_SW_PLL
- #define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
- #define STM32_PREDIV_VALUE 1
- #define STM32_PLLMUL_VALUE 12
- #define STM32_HPRE STM32_HPRE_DIV1
- #define STM32_PPRE STM32_PPRE_DIV1
- #define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
- #define STM32_MCOPRE STM32_MCOPRE_DIV1
- #define STM32_PLLNODIV STM32_PLLNODIV_DIV2
- #define STM32_USBSW STM32_USBSW_HSI48
- #define STM32_CECSW STM32_CECSW_HSI
- #define STM32_I2C1SW STM32_I2C1SW_HSI
- #define STM32_USART1SW STM32_USART1SW_PCLK
- #define STM32_RTCSEL STM32_RTCSEL_LSI
- /*
- * IRQ system settings.
- */
- #define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3
- #define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3
- #define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3
- #define STM32_IRQ_EXTI16_IRQ_PRIORITY 3
- #define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3
- #define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3
- /*
- * ADC driver system settings.
- */
- #define STM32_ADC_USE_ADC1 FALSE
- #define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK
- #define STM32_ADC_ADC1_DMA_PRIORITY 2
- #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
- #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
- /*
- * GPT driver system settings.
- */
- #define STM32_GPT_USE_TIM1 FALSE
- #define STM32_GPT_USE_TIM2 FALSE
- #define STM32_GPT_USE_TIM3 FALSE
- #define STM32_GPT_USE_TIM14 FALSE
- #define STM32_GPT_TIM1_IRQ_PRIORITY 2
- #define STM32_GPT_TIM2_IRQ_PRIORITY 2
- #define STM32_GPT_TIM3_IRQ_PRIORITY 2
- #define STM32_GPT_TIM14_IRQ_PRIORITY 2
- /*
- * I2C driver system settings.
- */
- #define STM32_I2C_USE_I2C1 FALSE
- #define STM32_I2C_BUSY_TIMEOUT 50
- #define STM32_I2C_I2C1_IRQ_PRIORITY 3
- #define STM32_I2C_USE_DMA TRUE
- #define STM32_I2C_I2C1_DMA_PRIORITY 1
- #define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
- #define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
- #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
- /*
- * I2S driver system settings.
- */
- #define STM32_I2S_USE_SPI1 FALSE
- #define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \
- STM32_I2S_MODE_RX)
- #define STM32_I2S_SPI1_IRQ_PRIORITY 2
- #define STM32_I2S_SPI1_DMA_PRIORITY 1
- #define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
- #define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
- #define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
- /*
- * ICU driver system settings.
- */
- #define STM32_ICU_USE_TIM1 FALSE
- #define STM32_ICU_USE_TIM2 FALSE
- #define STM32_ICU_USE_TIM3 FALSE
- #define STM32_ICU_TIM1_IRQ_PRIORITY 3
- #define STM32_ICU_TIM2_IRQ_PRIORITY 3
- #define STM32_ICU_TIM3_IRQ_PRIORITY 3
- /*
- * PWM driver system settings.
- */
- #define STM32_PWM_USE_ADVANCED FALSE
- #define STM32_PWM_USE_TIM1 FALSE
- #define STM32_PWM_USE_TIM2 FALSE
- #define STM32_PWM_USE_TIM3 FALSE
- #define STM32_PWM_TIM1_IRQ_PRIORITY 3
- #define STM32_PWM_TIM2_IRQ_PRIORITY 3
- #define STM32_PWM_TIM3_IRQ_PRIORITY 3
- /*
- * SERIAL driver system settings.
- */
- #define STM32_SERIAL_USE_USART1 TRUE
- #define STM32_SERIAL_USART1_PRIORITY 3
- /*
- * SPI driver system settings.
- */
- #define STM32_SPI_USE_SPI1 FALSE
- #define STM32_SPI_SPI1_DMA_PRIORITY 1
- #define STM32_SPI_SPI1_IRQ_PRIORITY 2
- #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
- #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
- #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
- /*
- * ST driver system settings.
- */
- #define STM32_ST_IRQ_PRIORITY 2
- #define STM32_ST_USE_TIMER 2
- /*
- * UART driver system settings.
- */
- #define STM32_UART_USE_USART1 FALSE
- #define STM32_UART_USART1_IRQ_PRIORITY 3
- #define STM32_UART_USART1_DMA_PRIORITY 0
- #define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
- #define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
- #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
- /*
- * WDG driver system settings.
- */
- #define STM32_WDG_USE_IWDG FALSE
- #endif /* MCUCONF_H */
|