danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
..
cfg 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
debug 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
make 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
source 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
.cproject 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
.project 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
Makefile 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
main.c 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve
readme.txt 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 éve

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F407. **
*****************************************************************************

** TARGET **

The demo runs on an Olimex STM32-E407 board.

** The Demo **

The demo currently just flashes a LED using a thread and serves HTTP requests
at address 192.168.1.10 on port 80.
FatFs integrated using SDIO.
The USB-FS port is used as USB-CDC and a command shell is ready to accepts
commands there.

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com