12345678910111213141516171819202122 |
- *****************************************************************************
- ** ChibiOS/RT port for Atmel AVR ATmega2560. **
- *****************************************************************************
- ** TARGET **
- The demo runs on an Arduino Mega board.
- ** The Demo **
- The demo currently just prints the OSLIB test suite output on Serial0, which is
- available on the board USB connector (FT232 converter), and toggles the LED
- on PB7 (pin 13 on Arduino IDE) every second.
- ** Build Procedure **
- The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
- ** Notes **
- This demo runs natively so the Arduino bootloader must be removed and the FUSEs
- reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
|