1234567891011121314151617181920212223 |
- *****************************************************************************
- ** ChibiOS/NIL port for Atmel AVR ATmega2560. **
- *****************************************************************************
- ** TARGET **
- The demo runs on an Arduino Mega board.
- ** The Demo **
- One thread prints a message to the serial console, which is available on
- the board USB connector (FT232 converter).
- Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.
- ** Build Procedure **
- The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
- ** Notes **
- This demo runs natively so the Arduino bootloader must be removed and the FUSEs
- reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
|