danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 gadi atpakaļ | |
|---|---|---|
| .. | ||
| Makefile | 2 gadi atpakaļ | |
| chconf.h | 2 gadi atpakaļ | |
| halconf.h | 2 gadi atpakaļ | |
| main.c | 2 gadi atpakaļ | |
| mcuconf.h | 2 gadi atpakaļ | |
| readme.txt | 2 gadi atpakaļ | |
readme.txt
*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega328p **
*****************************************************************************
** TARGET **
The demo runs on an Arduino Nano board.
** The Demo **
The demo currently just prints a message to the Serial0, which is available
on the board USB connector (FT232 converter),
and toggles the LED on PB5 (pin 13 on Arduino IDE) every second.
** Build Procedure **
The demo was built using the GCC AVR toolchain.
** ChibiOS/RT port for Atmel AVR ATmega328p **
*****************************************************************************
** TARGET **
The demo runs on an Arduino Nano board.
** The Demo **
The demo currently just prints a message to the Serial0, which is available
on the board USB connector (FT232 converter),
and toggles the LED on PB5 (pin 13 on Arduino IDE) every second.
** Build Procedure **
The demo was built using the GCC AVR toolchain.