N3_sub/libraries/AP_HAL_ChibiOS/AnalogIn.cpp

/*
 * This file is free software: you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This file is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 * See the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program.  If not, see <http://www.gnu.org/licenses/>.
 * 
 * Code by Andrew Tridgell and Siddharth Bharat Purohit
 */
#include <AP_HAL/AP_HAL.h>
#include "ch.h"
#include "hal.h"

#if HAL_USE_ADC == TRUE && !defined(HAL_DISABLE_ADC_DRIVER)

#include "AnalogIn.h"

#if HAL_WITH_IO_MCU
#include <AP_IOMCU/AP_IOMCU.h>
extern AP_IOMCU iomcu;
#endif

#include "hwdef/common/stm32_util.h"

#ifndef CHIBIOS_ADC_MAVLINK_DEBUG
// this allows the first 6 analog channels to be reported by mavlink for debugging purposes
#define CHIBIOS_ADC_MAVLINK_DEBUG 0
#endif

#include <GCS_MAVLink/GCS_MAVLink.h>

#define ANLOGIN_DEBUGGING 0

// base voltage scaling for 12 bit 3.3V ADC
#define VOLTAGE_SCALING (3.3f/(1<<12))

#if ANLOGIN_DEBUGGING
 # define Debug(fmt, args ...)  do {printf("%s:%d: " fmt "\n", __FUNCTION__, __LINE__, ## args); } while(0)
#else
 # define Debug(fmt, args ...)
#endif

extern const AP_HAL::HAL& hal;

using namespace ChibiOS;

// special pins
#define ANALOG_SERVO_VRSSI_PIN 103

/*
  scaling table between ADC count and actual input voltage, to account
  for voltage dividers on the board. 
 */
const AnalogIn::pin_info AnalogIn::pin_config[] = HAL_ANALOG_PINS;

#define ADC_GRP1_NUM_CHANNELS   ARRAY_SIZE(AnalogIn::pin_config)

// samples filled in by ADC DMA engine
adcsample_t *AnalogIn::samples;
uint32_t AnalogIn::sample_sum[ADC_GRP1_NUM_CHANNELS];
uint32_t AnalogIn::sample_count;

AnalogSource::AnalogSource(int16_t pin, float initial_value) :
    _pin(pin),
    _value(initial_value),
    _value_ratiometric(initial_value),
    _latest_value(initial_value),
    _sum_count(0),
    _sum_value(0),
    _sum_ratiometric(0)
{
}


float AnalogSource::read_average() 
{
    WITH_SEMAPHORE(_semaphore);

    if (_sum_count == 0) {
        return _value;
    }
    _value = _sum_value / _sum_count;
    _value_ratiometric = _sum_ratiometric / _sum_count;
    _sum_value = 0;
    _sum_ratiometric = 0;
    _sum_count = 0;

    return _value;
}

float AnalogSource::read_latest() 
{
    return _latest_value;
}

/*
  return scaling from ADC count to Volts
 */
float AnalogSource::_pin_scaler(void)
{
    float scaling = VOLTAGE_SCALING;
    for (uint8_t i=0; i<ADC_GRP1_NUM_CHANNELS; i++) {
        if (AnalogIn::pin_config[i].channel == _pin) {
            scaling = AnalogIn::pin_config[i].scaling;
            break;
        }
    }
    return scaling;
}

/*
  return voltage in Volts
 */
float AnalogSource::voltage_average()
{
    return _pin_scaler() * read_average();
}

/*
  return voltage in Volts, assuming a ratiometric sensor powered by
  the 5V rail
 */
float AnalogSource::voltage_average_ratiometric()
{
    voltage_average();
    return _pin_scaler() * _value_ratiometric;
}

/*
  return voltage in Volts
 */
float AnalogSource::voltage_latest()
{
    return _pin_scaler() * read_latest();
}

void AnalogSource::set_pin(uint8_t pin)
{
    if (_pin == pin) {
        return;
    }
    WITH_SEMAPHORE(_semaphore);
    _pin = pin;
    _sum_value = 0;
    _sum_ratiometric = 0;
    _sum_count = 0;
    _latest_value = 0;
    _value = 0;
    _value_ratiometric = 0;
}

/*
  apply a reading in ADC counts
 */
void AnalogSource::_add_value(float v, float vcc5V)
{
    WITH_SEMAPHORE(_semaphore);

    _latest_value = v;
    _sum_value += v;
    if (vcc5V < 3.0f) {
        _sum_ratiometric += v;
    } else {
        // this compensates for changes in the 5V rail relative to the
        // 3.3V reference used by the ADC.
        _sum_ratiometric += v * 5.0f / vcc5V;
    }
    _sum_count++;
    if (_sum_count == 254) {
        _sum_value /= 2;
        _sum_ratiometric /= 2;
        _sum_count /= 2;
    }
}


/*
  callback from ADC driver when sample buffer is filled
 */
void AnalogIn::adccallback(ADCDriver *adcp)
{
    const adcsample_t *buffer = samples;

    stm32_cacheBufferInvalidate(buffer, sizeof(adcsample_t)*ADC_DMA_BUF_DEPTH*ADC_GRP1_NUM_CHANNELS);
    for (uint8_t i = 0; i < ADC_DMA_BUF_DEPTH; i++) {
        for (uint8_t j = 0; j < ADC_GRP1_NUM_CHANNELS; j++) { 
            sample_sum[j] += *buffer++;
        }
    }
    sample_count += ADC_DMA_BUF_DEPTH;
}

/*
  setup adc peripheral to capture samples with DMA into a buffer
 */
void AnalogIn::init()
{
    if (ADC_GRP1_NUM_CHANNELS == 0) {
        return;
    }

    samples = (adcsample_t *)hal.util->malloc_type(sizeof(adcsample_t)*ADC_DMA_BUF_DEPTH*ADC_GRP1_NUM_CHANNELS, AP_HAL::Util::MEM_DMA_SAFE);

    adcStart(&ADCD1, NULL);
    memset(&adcgrpcfg, 0, sizeof(adcgrpcfg));
    adcgrpcfg.circular = true;
    adcgrpcfg.num_channels = ADC_GRP1_NUM_CHANNELS;
    adcgrpcfg.end_cb = adccallback;
#if defined(STM32H7)
    // use 12 bits resolution to keep scaling factors the same as other boards.
    // todo: enable oversampling in cfgr2 ?
    adcgrpcfg.cfgr = ADC_CFGR_CONT | ADC_CFGR_RES_12BITS;
#else
    adcgrpcfg.sqr1 = ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS);
    adcgrpcfg.cr2 = ADC_CR2_SWSTART;
#endif

    for (uint8_t i=0; i<ADC_GRP1_NUM_CHANNELS; i++) {
        uint8_t chan = pin_config[i].channel;
        // setup cycles per sample for the channel
#if defined(STM32H7)
        adcgrpcfg.pcsel |= (1<<chan);
        adcgrpcfg.smpr[chan/10] |= ADC_SMPR_SMP_384P5 << (3*(chan%10));
        if (i < 4) {
            adcgrpcfg.sqr[0] |= chan << (6*(i+1));
        } else if (i < 9) {
            adcgrpcfg.sqr[1] |= chan << (6*(i-4));
        } else {
            adcgrpcfg.sqr[2] |= chan << (6*(i-9));
        }
#else
        if (chan < 10) {
            adcgrpcfg.smpr2 |= ADC_SAMPLE_480 << (3*chan);
        } else {
            adcgrpcfg.smpr1 |= ADC_SAMPLE_480 << (3*(chan-10));
        }
        // setup channel sequence
        if (i < 6) {
            adcgrpcfg.sqr3 |= chan << (5*i);
        } else if (i < 12) {
            adcgrpcfg.sqr2 |= chan << (5*(i-6));
        } else {
            adcgrpcfg.sqr1 |= chan << (5*(i-12));
        }
#endif
    }
    adcStartConversion(&ADCD1, &adcgrpcfg, samples, ADC_DMA_BUF_DEPTH);
}

/*
  calculate average sample since last read for all channels
 */
void AnalogIn::read_adc(uint32_t *val)
{
    chSysLock();
    for (uint8_t i = 0; i < ADC_GRP1_NUM_CHANNELS; i++) {
        val[i] = sample_sum[i] / sample_count;
    }
    memset(sample_sum, 0, sizeof(sample_sum));
    sample_count = 0;
    chSysUnlock();
}

/*
  called at 1kHz
 */
void AnalogIn::_timer_tick(void)
{
    // read adc at 100Hz
    uint32_t now = AP_HAL::micros();
    uint32_t delta_t = now - _last_run;
    if (delta_t < 10000) {
        return;
    }
    _last_run = now;

    uint32_t buf_adc[ADC_GRP1_NUM_CHANNELS];

    /* read all channels available */
    read_adc(buf_adc);

    // update power status flags
    update_power_flags();
    
    // match the incoming channels to the currently active pins
    for (uint8_t i=0; i < ADC_GRP1_NUM_CHANNELS; i++) {
#ifdef ANALOG_VCC_5V_PIN
        if (pin_config[i].channel == ANALOG_VCC_5V_PIN) {
            // record the Vcc value for later use in
            // voltage_average_ratiometric()
            _board_voltage = buf_adc[i] * pin_config[i].scaling;
        }
#endif
#ifdef FMU_SERVORAIL_ADC_CHAN
        if (pin_config[i].channel == FMU_SERVORAIL_ADC_CHAN) {
           _servorail_voltage = buf_adc[i] * pin_config[i].scaling;
        }
#endif
    }

#if HAL_WITH_IO_MCU
    // now handle special inputs from IOMCU
    _servorail_voltage = iomcu.get_vservo();
    _rssi_voltage = iomcu.get_vrssi();
#endif
    
    for (uint8_t i=0; i<ADC_GRP1_NUM_CHANNELS; i++) {
        Debug("chan %u value=%u\n",
              (unsigned)pin_config[i].channel,
              (unsigned)buf_adc[i]);
        for (uint8_t j=0; j < ANALOG_MAX_CHANNELS; j++) {
            ChibiOS::AnalogSource *c = _channels[j];
            if (c != nullptr) {
                if (pin_config[i].channel == c->_pin) {
                    // add a value
                    c->_add_value(buf_adc[i], _board_voltage);
                } else if (c->_pin == ANALOG_SERVO_VRSSI_PIN) {
                    c->_add_value(_rssi_voltage / VOLTAGE_SCALING, 0);
                }
            }
        }
    }

#if CHIBIOS_ADC_MAVLINK_DEBUG
    static uint8_t count;
    if (AP_HAL::millis() > 5000 && count++ == 10) {
        count = 0;
        uint16_t adc[6] {};
        uint8_t n = ADC_GRP1_NUM_CHANNELS;
        if (n > 6) {
            n = 6;
        }
        for (uint8_t i=0; i < n; i++) {
            adc[i] = buf_adc[i];
        }
        mavlink_msg_ap_adc_send(MAVLINK_COMM_0, adc[0], adc[1], adc[2], adc[3], adc[4], adc[5]);
    }
#endif
}

AP_HAL::AnalogSource* AnalogIn::channel(int16_t pin) 
{
    for (uint8_t j=0; j<ANALOG_MAX_CHANNELS; j++) {
        if (_channels[j] == nullptr) {
            _channels[j] = new AnalogSource(pin, 0.0f);
            return _channels[j];
        }
    }
    hal.console->printf("Out of analog channels\n");
    return nullptr;
}

/*
  update power status flags
 */
void AnalogIn::update_power_flags(void)
{
    uint16_t flags = 0;

#ifdef HAL_GPIO_PIN_VDD_BRICK_VALID
    if (!palReadLine(HAL_GPIO_PIN_VDD_BRICK_VALID)) {
        flags |= MAV_POWER_STATUS_BRICK_VALID;
    }
#endif
    
#ifdef HAL_GPIO_PIN_VDD_SERVO_VALID
    if (!palReadLine(HAL_GPIO_PIN_VDD_SERVO_VALID)) {
        flags |= MAV_POWER_STATUS_SERVO_VALID;
    }
#elif defined(HAL_GPIO_PIN_VDD_BRICK2_VALID)
    // some boards defined BRICK2 instead of servo valid
    if (!palReadLine(HAL_GPIO_PIN_VDD_BRICK2_VALID)) {
        flags |= MAV_POWER_STATUS_SERVO_VALID;
    }
#endif

#ifdef HAL_GPIO_PIN_VBUS
	if (palReadLine(HAL_GPIO_PIN_VBUS)) {
        flags |= MAV_POWER_STATUS_USB_CONNECTED;
    }
#elif defined(HAL_GPIO_PIN_nVBUS)
    if (!palReadLine(HAL_GPIO_PIN_nVBUS)) {
        flags |= MAV_POWER_STATUS_USB_CONNECTED;
    }
#endif
    
#ifdef HAL_GPIO_PIN_VDD_5V_HIPOWER_OC
    if (!palReadLine(HAL_GPIO_PIN_VDD_5V_HIPOWER_OC)) {
        flags |= MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT;
    }    
#endif

#ifdef HAL_GPIO_PIN_VDD_5V_PERIPH_OC
    if (!palReadLine(HAL_GPIO_PIN_VDD_5V_PERIPH_OC)) {
        flags |= MAV_POWER_STATUS_PERIPH_OVERCURRENT;
    }    
#endif
    if (_power_flags != 0 && 
        _power_flags != flags && 
        hal.util->get_soft_armed()) {
        // the power status has changed while armed
        flags |= MAV_POWER_STATUS_CHANGED;
    }
    _power_flags = flags;
}
#endif // HAL_USE_ADC