wangdan/N3_sub @ f79dadc496625978d82931306357561adc1e48bf

danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6		%!s(int64=2) %!d(string=hai) anos
..
README.md	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
__init__.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
apmsetrate.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
bwtest.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
magtest.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mav2pcap.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mav_accel.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mavgps.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mavtcpsniff.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mavtest.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
mavtester.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos
wptogpx.py	6b2cb6fa39 this N3 net clean robot use bfd1.5V6	%!s(int64=2) %!d(string=hai) anos

		
				README.md
			
				pymavlink Examples

File
Description

mavtest.py
Demonstrates creating a mavlink message, putting it on a buffer and then decoding from said buffer.

bwtest.py
Check bandwith of link. Display results on terminal.

mav_accel.py
Show accelerometer calibration for a set of logs.

apmsetrate.py
Set the Stream Rate on an APM.

magtest.py
Rotate APMs on bench to test magnetometers.

mavtcpsniff.py
Connect as a client to two tcpip ports on localhost with mavlink packets. Pass them both directions, and show packets in human-readable format on-screen.

mav2pcap.py
Packetizes a binary MAVLink stream. The resulting packets are stored into a PCAP file, which is compatible to tools like Wireshark.

wptogpx.py
Extract GPS data from a waypoint file, and create a GPX file, for loading into Google Earth.

mavgps.py
Allows connection of the uBlox u-Center software to a uBlox GPS device connected to a PX4 or Pixhawk device, using Mavlink's SERIAL_CONTROL support to route serial traffic to/from the GPS, and exposing the data to u-Center via a local TCP connection.

mavtester.py
Test mavlink messages.

File	Description
mavtest.py	Demonstrates creating a mavlink message, putting it on a buffer and then decoding from said buffer.
bwtest.py	Check bandwith of link. Display results on terminal.
mav_accel.py	Show accelerometer calibration for a set of logs.
apmsetrate.py	Set the Stream Rate on an APM.
magtest.py	Rotate APMs on bench to test magnetometers.
mavtcpsniff.py	Connect as a client to two tcpip ports on localhost with mavlink packets. Pass them both directions, and show packets in human-readable format on-screen.
mav2pcap.py	Packetizes a binary MAVLink stream. The resulting packets are stored into a PCAP file, which is compatible to tools like Wireshark.
wptogpx.py	Extract GPS data from a waypoint file, and create a GPX file, for loading into Google Earth.
mavgps.py	Allows connection of the uBlox u-Center software to a uBlox GPS device connected to a PX4 or Pixhawk device, using Mavlink's SERIAL_CONTROL support to route serial traffic to/from the GPS, and exposing the data to u-Center via a local TCP connection.
mavtester.py	Test mavlink messages.