danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 éve | |
|---|---|---|
| .. | ||
| Makefile | 2 éve | |
| chconf.h | 2 éve | |
| halconf.h | 2 éve | |
| main.c | 2 éve | |
| mcuconf.h | 2 éve | |
| readme.txt | 2 éve | |
readme.txt
*****************************************************************************
** ChibiOS/RT port for ATxmega128a4u. **
*****************************************************************************
** TARGET **
The demo runs on the mattair Tech MT-DB-X4 board.
** The Demo **
The demo show how to configure and use the USARTC0 to transmit an Hello world!
message. To see this message in a console on a computer, you must connect an
FTDI adapter to PIN PC3(TX) and PC2(RX).
** Build Procedure **
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
** Programming procedure **
The board can be flash by using the Makefile and the DFU Programmer tools.
See the make file for more details.
** ChibiOS/RT port for ATxmega128a4u. **
*****************************************************************************
** TARGET **
The demo runs on the mattair Tech MT-DB-X4 board.
** The Demo **
The demo show how to configure and use the USARTC0 to transmit an Hello world!
message. To see this message in a console on a computer, you must connect an
FTDI adapter to PIN PC3(TX) and PC2(RX).
** Build Procedure **
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
** Programming procedure **
The board can be flash by using the Makefile and the DFU Programmer tools.
See the make file for more details.