danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 jaren geleden | |
|---|---|---|
| .. | ||
| Makefile | 2 jaren geleden | |
| chconf.h | 2 jaren geleden | |
| halconf.h | 2 jaren geleden | |
| main.c | 2 jaren geleden | |
| mcuconf.h | 2 jaren geleden | |
| readme.txt | 2 jaren geleden | |
readme.txt
*****************************************************************************
** ChibiOS/RT SPI test on Atmel AVR ATmega328p. **
*****************************************************************************
** TARGET **
The test demo runs on an Arduino Uno board.
** The Demo **
This test writes to the SPI pins (MOSI/PD11 on the ATmega328p).
There's no feedback provided but the SPI can easily be analyzed with any
logic analyzer or sniffing with a buspirate or similar device.
** Build Procedure **
The demo was built using the GCC AVR toolchain.
** ChibiOS/RT SPI test on Atmel AVR ATmega328p. **
*****************************************************************************
** TARGET **
The test demo runs on an Arduino Uno board.
** The Demo **
This test writes to the SPI pins (MOSI/PD11 on the ATmega328p).
There's no feedback provided but the SPI can easily be analyzed with any
logic analyzer or sniffing with a buspirate or similar device.
** Build Procedure **
The demo was built using the GCC AVR toolchain.