danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
2 년 전 | |
|---|---|---|
| .. | ||
| Makefile | 2 년 전 | |
| chconf.h | 2 년 전 | |
| halconf.h | 2 년 전 | |
| main.c | 2 년 전 | |
| mcuconf.h | 2 년 전 | |
| readme.txt | 2 년 전 | |
readme.txt
*****************************************************************************
** ChibiOS/RT I2C test on Atmel AVR ATmega1280. **
*****************************************************************************
** TARGET **
The test demo runs on an Arduino Mega board.
** The Demo **
This test blinks the onboard LED and also writes/reads to a 24C64 connected
to the I2C pins (PD0/PD1 on the ATmega1280). There's no feedback provided but
the I2C can easily be analyzed with any logic analyzer or sniffing with a
buspirate or similar device.
** Build Procedure **
The demo was built using the GCC AVR toolchain.
** ChibiOS/RT I2C test on Atmel AVR ATmega1280. **
*****************************************************************************
** TARGET **
The test demo runs on an Arduino Mega board.
** The Demo **
This test blinks the onboard LED and also writes/reads to a 24C64 connected
to the I2C pins (PD0/PD1 on the ATmega1280). There's no feedback provided but
the I2C can easily be analyzed with any logic analyzer or sniffing with a
buspirate or similar device.
** Build Procedure **
The demo was built using the GCC AVR toolchain.