danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
..
.cproject 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
.project 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
Makefile 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
chconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
halconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
main.c 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
mcuconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ
readme.txt 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 gadi atpakaļ

readme.txt

*****************************************************************************
** ChibiOS/HAL - PWM-ICU drivers demo for STM32L1xx. **
*****************************************************************************

** TARGET **

The demo will on an STMicroelectronics STM32L-Discovery board.

** The Demo **

The application demonstrates the use of the STM32L1xx PWM-ICU drivers.

** Board Setup **

- Remove the LCD module.
- Connect PA15 and PC6 together.

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com