danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
..
debug 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
.cproject 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
.project 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
Makefile 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
chconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
halconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
main.c 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
mcuconf.h 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás
readme.txt 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 há 2 anos atrás

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M7 STM32F746G. **
*****************************************************************************

** TARGET **

The demo runs on an ST STM32F746G-Discovery board.

** The Demo **


** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com