danny wang
6b2cb6fa39
this N3 net clean robot use bfd1.5V6
|
%!s(int64=2) %!d(string=hai) anos | |
|---|---|---|
| .. | ||
| .cproject | %!s(int64=2) %!d(string=hai) anos | |
| .project | %!s(int64=2) %!d(string=hai) anos | |
| Makefile | %!s(int64=2) %!d(string=hai) anos | |
| chconf.h | %!s(int64=2) %!d(string=hai) anos | |
| halconf.h | %!s(int64=2) %!d(string=hai) anos | |
| main.c | %!s(int64=2) %!d(string=hai) anos | |
| mcuconf.h | %!s(int64=2) %!d(string=hai) anos | |
| readme.txt | %!s(int64=2) %!d(string=hai) anos | |
readme.txt
*****************************************************************************
** ChibiOS/HAL - UART driver demo for STM32F37x. **
*****************************************************************************
** TARGET **
The demo runs on an STMicroelectronics STM32373C-EVAL board.
** The Demo **
The application demonstrates the use of the STM32F37x UART driver.
** Board Setup **
- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).
** Build Procedure **
The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com
** ChibiOS/HAL - UART driver demo for STM32F37x. **
*****************************************************************************
** TARGET **
The demo runs on an STMicroelectronics STM32373C-EVAL board.
** The Demo **
The application demonstrates the use of the STM32F37x UART driver.
** Board Setup **
- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).
** Build Procedure **
The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com