danny wang 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
..
cfg 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
debug 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
source 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
.cproject 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
.project 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
Makefile 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
main.c 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás
readme.txt 6b2cb6fa39 this N3 net clean robot use bfd1.5V6 2 anos atrás

readme.txt

*****************************************************************************
** ChibiOS/HAL + ChibiOS/EX - SPI + LIS3DSH demo for STM32F4xx. **
*****************************************************************************

** TARGET **

The demo runs on an STM32F407 Discovery board REV C or later.

** The Demo **

The application demonstrates the use of the STM32F4xx SPI driver in order
to acquire data from LIS3DSH using ChibiOS/EX.

** Board Setup **

None required.

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

http://www.st.com