| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 |
- # hw definition file for processing by chibios_hwdef.py
- # for F777 bootloader
- # MCU class and specific type
- MCU STM32F7xx STM32F777xx
- # USB setup
- USB_VENDOR 0x0483 # ST
- USB_PRODUCT 0x5740
- USB_STRING_MANUFACTURER "mRo"
- # crystal frequency
- OSCILLATOR_HZ 24000000
- define STM32_LSECLK 32768U
- define STM32_LSEDRV (3U << 3U)
- define STM32_PLLSRC STM32_PLLSRC_HSE
- define STM32_PLLM_VALUE 24
- define STM32_PLLN_VALUE 432
- define STM32_PLLP_VALUE 2
- define STM32_PLLQ_VALUE 9
- # board ID for firmware load
- APJ_BOARD_ID 141
- FLASH_SIZE_KB 2048
- # bootloader is installed at zero offset
- FLASH_RESERVE_START_KB 0
- # the location where the bootloader will put the firmware
- FLASH_BOOTLOADER_LOAD_KB 96
- PB11 LED_BOOTLOADER OUTPUT
- # define all 3 to make LED output White.
- PB1 LED_ACTIVITY OUTPUT
- PB3 LED_ACTIVITY2 OUTPUT
- # PB11 LED_ACTIVITY3 OUTPUT
- define HAL_LED_ON 0
- # board voltage
- STM32_VDD 330U
- # order of UARTs (and USB)
- UART_ORDER OTG1 UART7
- # UART7 maps to uartF in the HAL (serial5 in SERIALn_ parameters).
- PE7 UART7_RX UART7
- PE8 UART7_TX UART7
- PA11 OTG_FS_DM OTG1
- PA12 OTG_FS_DP OTG1
- PA13 JTMS-SWDIO SWD
- PA14 JTCK-SWCLK SWD
- define HAL_USE_EMPTY_STORAGE 1
- define HAL_STORAGE_SIZE 16384
|
