| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 |
- # hw definition file for processing by chibios_pins.py
- # for Holybro KakuteF7 bootloader
- # MCU class and specific type
- MCU STM32F7xx STM32F745xx
- # board ID for firmware load
- APJ_BOARD_ID 123
- # crystal frequency, setup to use external oscillator
- OSCILLATOR_HZ 8000000
- define STM32_LSECLK 32768U
- define STM32_LSEDRV (3U << 3U)
- define STM32_PLLSRC STM32_PLLSRC_HSE
- define STM32_PLLM_VALUE 8
- define STM32_PLLN_VALUE 432
- define STM32_PLLP_VALUE 2
- define STM32_PLLQ_VALUE 9
- FLASH_SIZE_KB 1024
- # bootloader starts at zero offset
- FLASH_RESERVE_START_KB 0
- # the location where the bootloader will put the firmware
- FLASH_BOOTLOADER_LOAD_KB 96
- # board voltage
- STM32_VDD 330U
- # order of UARTs (and USB)
- UART_ORDER OTG1
- # PA10 IO-debug-console
- PA11 OTG_FS_DM OTG1
- PA12 OTG_FS_DP OTG1
- PA13 JTMS-SWDIO SWD
- PA14 JTCK-SWCLK SWD
- PA2 LED_BOOTLOADER OUTPUT LOW
- define HAL_LED_ON 0
- define HAL_USE_EMPTY_STORAGE 1
- define HAL_STORAGE_SIZE 16384
|
