#include "Sub.h" // Functions that will handle joystick/gamepad input // ---------------------------------------------------------------------------- // Anonymous namespace to hold variables used only in this file namespace { float cam_tilt = 1500.0; float cam_pan = 1500.0; int16_t lights1 = 1100; int16_t lights2 = 1100; int16_t rollTrim = 0; int16_t pitchTrim = 0; int16_t zTrim = 0; int16_t xTrim = 0; int16_t yTrim = 0; int16_t video_switch = 1100; int16_t x_last, y_last, z_last; uint16_t buttons_prev; // Servo control output channels // TODO: Allow selecting output channels const uint8_t SERVO_CHAN_1 = 9; // Pixhawk Aux1 const uint8_t SERVO_CHAN_2 = 10; // Pixhawk Aux2 const uint8_t SERVO_CHAN_3 = 11; // Pixhawk Aux3 uint8_t roll_pitch_flag = false; // Flag to adjust roll/pitch instead of forward/lateral bool controls_reset_since_input_hold = true; } void Sub::init_joystick() { default_js_buttons(); lights1 = RC_Channels::rc_channel(8)->get_radio_min(); lights2 = RC_Channels::rc_channel(9)->get_radio_min(); set_mode(MANUAL, MODE_REASON_TX_COMMAND); // Initialize flight mode if (g.numGainSettings < 1) { g.numGainSettings.set_and_save(1); } if (g.numGainSettings == 1 || (g.gain_default < g.maxGain + 0.01 && g.gain_default > g.minGain - 0.01)) { gain = constrain_float(g.gain_default, g.minGain, g.maxGain); // Use default gain parameter } else { // Use setting closest to average of minGain and maxGain gain = g.minGain + (g.numGainSettings/2 - 1) * (g.maxGain - g.minGain) / (g.numGainSettings - 1); } gain = constrain_float(gain, 0.1, 1.0); } void Sub::transform_manual_control_to_rc_override(int16_t x, int16_t y, int16_t z, int16_t r, uint16_t buttons) { float rpyScale = 0.5*gain; // Scale -1000-1000 to -400-400 with gain float throttleScale = 1.0*gain*g.throttle_gain; // Scale 0-1000 to 0-800 times gain int16_t rpyCenter = 1500; int16_t throttleBase = 1500-500*throttleScale; bool shift = false; // Neutralize camera tilt and pan speed setpoint cam_tilt = 1500; cam_pan = 1500; // Detect if any shift button is pressed for (uint8_t i = 0 ; i < 16 ; i++) { if ((buttons & (1 << i)) && get_button(i)->function() == JSButton::button_function_t::k_shift) { shift = true; } } // Act if button is pressed // Only act upon pressing button and ignore holding. This provides compatibility with Taranis as joystick. for (uint8_t i = 0 ; i < 16 ; i++) { if ((buttons & (1 << i))) { handle_jsbutton_press(i,shift,(buttons_prev & (1 << i))); // buttonDebounce = tnow_ms; } else if (buttons_prev & (1 << i)) { handle_jsbutton_release(i, shift); } } buttons_prev = buttons; // attitude mode: if (roll_pitch_flag == 1) { // adjust roll/pitch trim with joystick input instead of forward/lateral pitchTrim = -x * rpyScale; rollTrim = y * rpyScale; } uint32_t tnow = AP_HAL::millis(); int16_t zTot; int16_t yTot; int16_t xTot; if (!controls_reset_since_input_hold) { zTot = zTrim + 500; // 500 is neutral for throttle yTot = yTrim; xTot = xTrim; // if all 3 axes return to neutral, than we're ready to accept input again controls_reset_since_input_hold = (abs(z - 500) < 50) && (abs(y) < 50) && (abs(x) < 50); } else { zTot = z + zTrim; yTot = y + yTrim; xTot = x + xTrim; } RC_Channels::set_override(0, constrain_int16(pitchTrim + rpyCenter,1000,2000), tnow); // pitch RC_Channels::set_override(1, constrain_int16(rollTrim + rpyCenter,1000,2000), tnow); // roll RC_Channels::set_override(2, constrain_int16((zTot)*throttleScale+throttleBase,1000,2000), tnow); // throttle RC_Channels::set_override(3, constrain_int16(r*rpyScale+rpyCenter,1000,2000), tnow); // yaw // maneuver mode: if (roll_pitch_flag == 0) { // adjust forward and lateral with joystick input instead of roll and pitch RC_Channels::set_override(4, constrain_int16((xTot)*rpyScale+rpyCenter,1000,2000), tnow); // forward for ROV RC_Channels::set_override(5, constrain_int16((yTot)*rpyScale+rpyCenter,1000,2000), tnow); // lateral for ROV } else { // neutralize forward and lateral input while we are adjusting roll and pitch RC_Channels::set_override(4, constrain_int16(xTrim*rpyScale+rpyCenter,1000,2000), tnow); // forward for ROV RC_Channels::set_override(5, constrain_int16(yTrim*rpyScale+rpyCenter,1000,2000), tnow); // lateral for ROV } RC_Channels::set_override(6, cam_pan, tnow); // camera pan RC_Channels::set_override(7, cam_tilt, tnow); // camera tilt RC_Channels::set_override(8, lights1, tnow); // lights 1 RC_Channels::set_override(9, lights2, tnow); // lights 2 RC_Channels::set_override(10, video_switch, tnow); // video switch lights1 =constrain_int16(lights1, 1100, 1900); // Store old x, y, z values for use in input hold logic x_last = x; y_last = y; z_last = z; } void Sub::handle_jsbutton_press(uint8_t button, bool shift, bool held) { // Used for trimming level in vehicle frame Quaternion attitudeTarget; attitudeTarget.from_euler( radians(last_roll * 0.01f), radians(last_pitch * 0.01f), radians(last_yaw * 0.01f) ); Vector3f localPitch = Vector3f(0, 1, 0); Vector3f localRoll = Vector3f(1, 0, 0); // Act based on the function assigned to this button switch (get_button(button)->function(shift)) { case JSButton::button_function_t::k_arm_toggle: if (motors.armed()) { arming.disarm(); } else { arming.arm(AP_Arming::Method::MAVLINK); } break; case JSButton::button_function_t::k_arm: arming.arm(AP_Arming::Method::MAVLINK); break; case JSButton::button_function_t::k_disarm: if (!held) { PressLevel = no; PressLevel_f =5.0; prepare_state = Horizontal; motor1_speed_target =0; motor2_speed_target =0; track_motor_arm=1; } arming.disarm(); break; case JSButton::button_function_t::k_mode_manual: set_mode(MANUAL, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_stabilize: set_mode(STABILIZE, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_depth_hold: set_mode(ALT_HOLD, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_auto: set_mode(AUTO, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_guided: set_mode(GUIDED, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_circle: set_mode(CIRCLE, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_acro: set_mode(ACRO, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_poshold: set_mode(POSHOLD, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_clean: set_mode(CLEAN, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mode_sport: set_mode(SPORT, MODE_REASON_TX_COMMAND); break; case JSButton::button_function_t::k_mount_center: #if MOUNT == ENABLED camera_mount.set_angle_targets(0, 0, 0); // for some reason the call to set_angle_targets changes the mode to mavlink targeting! camera_mount.set_mode(MAV_MOUNT_MODE_RC_TARGETING); #endif break; case JSButton::button_function_t::k_mount_tilt_up: cam_tilt = 1900; break; case JSButton::button_function_t::k_mount_tilt_down: cam_tilt = 1100; break; case JSButton::button_function_t::k_camera_trigger: break; case JSButton::button_function_t::k_camera_source_toggle: if (!held) { static bool video_toggle = false; video_toggle = !video_toggle; if (video_toggle) { video_switch = 1900; gcs().send_text(MAV_SEVERITY_INFO,"Video Toggle: Source 2"); } else { video_switch = 1100; gcs().send_text(MAV_SEVERITY_INFO,"Video Toggle: Source 1"); } } break; case JSButton::button_function_t::k_mount_pan_right: cam_pan = 1900; break; case JSButton::button_function_t::k_mount_pan_left: cam_pan = 1100; break; case JSButton::button_function_t::k_lights1_cycle: if (!held) { if(lights1 ==1100){ lights1 = 1900; } else{ lights1 = 1100; } } break; case JSButton::button_function_t::k_lights1_brighter: if (!held) { RC_Channel* chan = RC_Channels::rc_channel(8); uint16_t min = chan->get_radio_min(); uint16_t max = chan->get_radio_max(); uint16_t step = (max - min) / g.lights_steps; lights1 = constrain_float(lights1 + step, min, max); } break; case JSButton::button_function_t::k_lights1_dimmer: if (!held) { RC_Channel* chan = RC_Channels::rc_channel(8); uint16_t min = chan->get_radio_min(); uint16_t max = chan->get_radio_max(); uint16_t step = (max - min) / g.lights_steps; lights1 = constrain_float(lights1 - step, min, max); } break; case JSButton::button_function_t::k_lights2_cycle: if (!held) { static bool increasing = true; RC_Channel* chan = RC_Channels::rc_channel(9); uint16_t min = chan->get_radio_min(); uint16_t max = chan->get_radio_max(); uint16_t step = (max - min) / g.lights_steps; if (increasing) { lights2 = constrain_float(lights2 + step, min, max); } else { lights2 = constrain_float(lights2 - step, min, max); } if (lights2 >= max || lights2 <= min) { increasing = !increasing; } } break; case JSButton::button_function_t::k_lights2_brighter: if (!held) { RC_Channel* chan = RC_Channels::rc_channel(9); uint16_t min = chan->get_radio_min(); uint16_t max = chan->get_radio_max(); uint16_t step = (max - min) / g.lights_steps; lights2 = constrain_float(lights2 + step, min, max); } break; case JSButton::button_function_t::k_lights2_dimmer: if (!held) { RC_Channel* chan = RC_Channels::rc_channel(9); uint16_t min = chan->get_radio_min(); uint16_t max = chan->get_radio_max(); uint16_t step = (max - min) / g.lights_steps; lights2 = constrain_float(lights2 - step, min, max); } break; case JSButton::button_function_t::k_gain_toggle: if (!held) { static bool lowGain = false; lowGain = !lowGain; if (lowGain) { gain = 0.5f; } else { gain = 1.0f; } gcs().send_text(MAV_SEVERITY_INFO,"#Gain: %2.0f%%",(double)gain*100); } break; case JSButton::button_function_t::k_gain_inc: { if (!held) { if(control_mode == CLEAN) { turn_angle =-16.0; gcs().send_text(MAV_SEVERITY_INFO,"%f turn_angle",(float)turn_angle); }else if(control_mode == STABILIZE){ if (!motors.armed()){ gcs().send_text(MAV_SEVERITY_INFO,"disarm used by current yaw is %f",(float)yaw_press); } else{ yaw_press +=3; if(yaw_press>=360){ yaw_press-=360; } gcs().send_text(MAV_SEVERITY_INFO,"%d %f yaw++",(int)yaw_press,(float)yaw_press); } } } break; } case JSButton::button_function_t::k_gain_dec: { if (!held) { if(control_mode == CLEAN) { turn_angle =16.0; gcs().send_text(MAV_SEVERITY_INFO,"%f turn_angle",(float)turn_angle); }else if(control_mode == STABILIZE){ if (!motors.armed()){ gcs().send_text(MAV_SEVERITY_INFO,"disarm used by current yaw is %f",(float)yaw_press); } else{ yaw_press -=3; if(yaw_press<0){ yaw_press+=360; } gcs().send_text(MAV_SEVERITY_INFO,"%d %f yaw--",(int)yaw_press,(float)yaw_press); } } } break; } case JSButton::button_function_t::k_trim_roll_inc: attitudeTarget.rotate(localRoll * radians(1)); last_roll = degrees(attitudeTarget.get_euler_roll()) * 100; last_pitch = degrees(attitudeTarget.get_euler_pitch()) * 100; last_yaw = degrees(attitudeTarget.get_euler_yaw()) * 100; break; case JSButton::button_function_t::k_trim_roll_dec: attitudeTarget.rotate(localRoll * radians(-1)); last_roll = degrees(attitudeTarget.get_euler_roll()) * 100; last_pitch = degrees(attitudeTarget.get_euler_pitch()) * 100; last_yaw = degrees(attitudeTarget.get_euler_yaw()) * 100; break; case JSButton::button_function_t::k_trim_pitch_inc: attitudeTarget.rotate(localPitch * radians(1)); last_roll = degrees(attitudeTarget.get_euler_roll()) * 100; last_pitch = degrees(attitudeTarget.get_euler_pitch()) * 100; last_yaw = degrees(attitudeTarget.get_euler_yaw()) * 100; break; case JSButton::button_function_t::k_trim_pitch_dec: attitudeTarget.rotate(localPitch * radians(-1)); last_roll = degrees(attitudeTarget.get_euler_roll()) * 100; last_pitch = degrees(attitudeTarget.get_euler_pitch()) * 100; last_yaw = degrees(attitudeTarget.get_euler_yaw()) * 100; break; case JSButton::button_function_t::k_input_hold_set: if(!motors.armed()) { break; } if(roll_pitch_flag) { last_pitch = 0; last_roll = 0; last_input_ms = 0; break; } if (!held) { zTrim = abs(z_last-500) > 50 ? z_last-500 : 0; xTrim = abs(x_last) > 50 ? x_last : 0; yTrim = abs(y_last) > 50 ? y_last : 0; bool input_hold_engaged_last = input_hold_engaged; input_hold_engaged = zTrim || xTrim || yTrim; if (input_hold_engaged) { gcs().send_text(MAV_SEVERITY_INFO,"#Input Hold Set"); } else if (input_hold_engaged_last) { gcs().send_text(MAV_SEVERITY_INFO,"#Input Hold Disabled"); } controls_reset_since_input_hold = !input_hold_engaged; } break; case JSButton::button_function_t::k_relay_1_on: relay.on(0); break; case JSButton::button_function_t::k_relay_1_off: relay.off(0); break; case JSButton::button_function_t::k_relay_1_toggle: if (!held) { relay.toggle(0); } break; case JSButton::button_function_t::k_relay_1_momentary: if (!held) { relay.on(0); } break; case JSButton::button_function_t::k_relay_2_on: relay.on(1); break; case JSButton::button_function_t::k_relay_2_off: relay.off(1); break; case JSButton::button_function_t::k_relay_2_toggle: if (!held) { relay.toggle(1); } break; case JSButton::button_function_t::k_relay_2_momentary: if (!held) { relay.on(1); } break; case JSButton::button_function_t::k_relay_3_on: relay.on(2); break; case JSButton::button_function_t::k_relay_3_off: relay.off(2); break; case JSButton::button_function_t::k_relay_3_toggle: if (!held) { relay.toggle(2); } break; case JSButton::button_function_t::k_relay_3_momentary: if (!held) { relay.on(2); } break; case JSButton::button_function_t::k_relay_4_on: relay.on(3); break; case JSButton::button_function_t::k_relay_4_off: relay.off(3); break; case JSButton::button_function_t::k_relay_4_toggle: if (!held) { relay.toggle(3); } break; case JSButton::button_function_t::k_relay_4_momentary: if (!held) { relay.on(3); } break; //////////////////////////////////////////////// // Servo functions // TODO: initialize case JSButton::button_function_t::k_servo_1_inc: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_1 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out + 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_1, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_1_dec: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_1 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out - 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_1, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_1_min: case JSButton::button_function_t::k_servo_1_min_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_output_min()); // 1-indexed } break; case JSButton::button_function_t::k_servo_1_min_toggle: if(!held) { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed if(chan->get_output_pwm() != chan->get_output_min()) { ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_output_min()); // 1-indexed } else { ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_trim()); // 1-indexed } } break; case JSButton::button_function_t::k_servo_1_max: case JSButton::button_function_t::k_servo_1_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_output_max()); // 1-indexed } break; case JSButton::button_function_t::k_servo_1_max_toggle: if(!held) { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed if(chan->get_output_pwm() != chan->get_output_max()) { ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_output_max()); // 1-indexed } else { ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_trim()); // 1-indexed } } break; case JSButton::button_function_t::k_servo_1_center: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_trim()); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_inc: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_2 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out + 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_2, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_dec: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_2 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out - 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_2, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_min: case JSButton::button_function_t::k_servo_2_min_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_2, chan->get_output_min()); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_max: case JSButton::button_function_t::k_servo_2_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_2, chan->get_output_max()); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_center: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_2, chan->get_trim()); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_inc: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_3 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out + 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_3, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_dec: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed uint16_t pwm_out = hal.rcout->read(SERVO_CHAN_3 - 1); // 0-indexed pwm_out = constrain_int16(pwm_out - 50, chan->get_output_min(), chan->get_output_max()); ServoRelayEvents.do_set_servo(SERVO_CHAN_3, pwm_out); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_min: case JSButton::button_function_t::k_servo_3_min_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_3, chan->get_output_min()); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_max: case JSButton::button_function_t::k_servo_3_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_3, chan->get_output_max()); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_center: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_3, chan->get_trim()); // 1-indexed } break; case JSButton::button_function_t::k_roll_pitch_toggle: if (!held) { roll_pitch_flag = !roll_pitch_flag; } break; case JSButton::button_function_t::k_custom_1: if (!held) { if(control_mode == STABILIZE){ //水平和竖直切换 if (prepare_state == Horizontal) { prepare_state = Vertical; track_head_gd =0.0; } else if (prepare_state == Vertical) { prepare_state = Horizontal; } gcs().send_text(MAV_SEVERITY_INFO,"prepare_state: %d",(int)prepare_state); } else if(control_mode == ACRO){ if(autoclean_command == FALSE){ autoclean_command =TRUE; }else{ autoclean_command =FALSE; } gcs().send_text(MAV_SEVERITY_INFO,"autoclean_flag: %d",(int)autoclean_command); } } break; case JSButton::button_function_t::k_custom_2: if (!held) { //十级 if(PressLevel == first) { PressLevel = second; PressLevel_f = 0.5;// }else if(PressLevel == second){ PressLevel = third; PressLevel_f = 0.75;// }else if(PressLevel == third){ PressLevel = forth; PressLevel_f = 1.5;// }else if (PressLevel == forth){ PressLevel = fifth; PressLevel_f = 4.55;// }else if(PressLevel == fifth){ PressLevel = no; PressLevel_f = 5.0; // }else if(PressLevel == no){ PressLevel = sixth; PressLevel_f = 5.45;// }else if (PressLevel == sixth){ PressLevel = seventh; PressLevel_f = 8.5;// }else if(PressLevel == seventh){ PressLevel = eighth; PressLevel_f = 9.25;// }else if (PressLevel == eighth){ PressLevel = ninth; PressLevel_f = 9.5;// }else if (PressLevel == ninth){ PressLevel = tenth; PressLevel_f = 10.0;//0.975 }else{ PressLevel = tenth; PressLevel_f = 10.0;//0.975 } gcs().send_text(MAV_SEVERITY_INFO,"%f level",(float)PressLevel_f); } break; case JSButton::button_function_t::k_custom_3: if (!held) {//十级 if(PressLevel == tenth) { PressLevel = ninth; PressLevel_f = 9.5;// }else if(PressLevel == ninth) { PressLevel = eighth; PressLevel_f = 9.25;// }else if(PressLevel == eighth){ PressLevel = seventh; PressLevel_f = 8.5;// }else if (PressLevel == seventh){ PressLevel = sixth; PressLevel_f = 5.45;// }else if(PressLevel == sixth){ PressLevel = no; PressLevel_f = 5.0;// }else if(PressLevel == no){ PressLevel = fifth; PressLevel_f = 4.55; // }else if (PressLevel == fifth){ PressLevel = forth; PressLevel_f = 1.5;// }else if(PressLevel == forth){ PressLevel = third; PressLevel_f = 0.75;// }else if (PressLevel == third){ PressLevel = second; PressLevel_f = 0.5; // }else if (PressLevel == second){ PressLevel = first; PressLevel_f = 0.0;//0.25 }else{ PressLevel = first; PressLevel_f = 0.0; //0.25 } gcs().send_text(MAV_SEVERITY_INFO,"%f level",(float)PressLevel_f); } break; case JSButton::button_function_t::k_custom_4: // Not implemented break; case JSButton::button_function_t::k_custom_5: // Not implemented break; case JSButton::button_function_t::k_custom_6: if (!held){ if(clean_mode == 0){ clean_mode =1; }else{ clean_mode =0; } } break; } } void Sub::handle_jsbutton_release(uint8_t button, bool shift) { // Act based on the function assigned to this button switch (get_button(button)->function(shift)) { case JSButton::button_function_t::k_relay_1_momentary: relay.off(0); break; case JSButton::button_function_t::k_relay_2_momentary: relay.off(1); break; case JSButton::button_function_t::k_relay_3_momentary: relay.off(2); break; case JSButton::button_function_t::k_relay_4_momentary: relay.off(3); break; case JSButton::button_function_t::k_servo_1_min_momentary: case JSButton::button_function_t::k_servo_1_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_1 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_1, chan->get_trim()); // 1-indexed } break; case JSButton::button_function_t::k_servo_2_min_momentary: case JSButton::button_function_t::k_servo_2_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_2 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_2, chan->get_trim()); // 1-indexed } break; case JSButton::button_function_t::k_servo_3_min_momentary: case JSButton::button_function_t::k_servo_3_max_momentary: { SRV_Channel* chan = SRV_Channels::srv_channel(SERVO_CHAN_3 - 1); // 0-indexed ServoRelayEvents.do_set_servo(SERVO_CHAN_3, chan->get_trim()); // 1-indexed } break; } } JSButton* Sub::get_button(uint8_t index) { // Help to access appropriate parameter switch (index) { case 0: return &g.jbtn_0; case 1: return &g.jbtn_1; case 2: return &g.jbtn_2; case 3: return &g.jbtn_3; case 4: return &g.jbtn_4; case 5: return &g.jbtn_5; case 6: return &g.jbtn_6; case 7: return &g.jbtn_7; case 8: return &g.jbtn_8; case 9: return &g.jbtn_9; case 10: return &g.jbtn_10; case 11: return &g.jbtn_11; case 12: return &g.jbtn_12; case 13: return &g.jbtn_13; case 14: return &g.jbtn_14; case 15: return &g.jbtn_15; default: return &g.jbtn_0; } } void Sub::default_js_buttons() { JSButton::button_function_t defaults[16][2] = { {JSButton::button_function_t::k_mode_clean, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_mode_manual, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_mode_depth_hold, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_mode_stabilize, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_disarm, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_shift, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_arm, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_mount_center, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_input_hold_set, JSButton::button_function_t::k_none}, {JSButton::button_function_t::k_mount_tilt_down, JSButton::button_function_t::k_mount_pan_left}, {JSButton::button_function_t::k_mount_tilt_up, JSButton::button_function_t::k_mount_pan_right}, {JSButton::button_function_t::k_gain_inc, JSButton::button_function_t::k_trim_pitch_dec}, {JSButton::button_function_t::k_gain_dec, JSButton::button_function_t::k_trim_pitch_inc}, {JSButton::button_function_t::k_lights1_dimmer, JSButton::button_function_t::k_trim_roll_dec}, {JSButton::button_function_t::k_lights1_brighter, JSButton::button_function_t::k_trim_roll_inc}, {JSButton::button_function_t::k_none, JSButton::button_function_t::k_none}, }; for (int i = 0; i < 16; i++) { get_button(i)->set_default(defaults[i][0], defaults[i][1]); } } void Sub::set_neutral_controls() { uint32_t tnow = AP_HAL::millis(); for (uint8_t i = 0; i < 6; i++) { RC_Channels::set_override(i, 1500, tnow); } // Clear pitch/roll trim settings pitchTrim = 0; rollTrim = 0; } void Sub::clear_input_hold() { xTrim = 0; yTrim = 0; zTrim = 0; input_hold_engaged = false; }