/* This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #pragma once #include #include #include #include #define FRSKY_TELEM_PAYLOAD_STATUS_CAPACITY 5 // size of the message buffer queue (max number of messages waiting to be sent) /* for FrSky D protocol (D-receivers) */ // FrSky sensor hub data IDs #define DATA_ID_GPS_ALT_BP 0x01 #define DATA_ID_TEMP1 0x02 #define DATA_ID_FUEL 0x04 #define DATA_ID_TEMP2 0x05 #define DATA_ID_GPS_ALT_AP 0x09 #define DATA_ID_BARO_ALT_BP 0x10 #define DATA_ID_GPS_SPEED_BP 0x11 #define DATA_ID_GPS_LONG_BP 0x12 #define DATA_ID_GPS_LAT_BP 0x13 #define DATA_ID_GPS_COURS_BP 0x14 #define DATA_ID_GPS_SPEED_AP 0x19 #define DATA_ID_GPS_LONG_AP 0x1A #define DATA_ID_GPS_LAT_AP 0x1B #define DATA_ID_BARO_ALT_AP 0x21 #define DATA_ID_GPS_LONG_EW 0x22 #define DATA_ID_GPS_LAT_NS 0x23 #define DATA_ID_CURRENT 0x28 #define DATA_ID_VFAS 0x39 #define START_STOP_D 0x5E #define BYTESTUFF_D 0x5D /* for FrSky SPort and SPort Passthrough (OpenTX) protocols (X-receivers) */ // FrSky Sensor IDs #define SENSOR_ID_VARIO 0x00 // Sensor ID 0 #define SENSOR_ID_FAS 0x22 // Sensor ID 2 #define SENSOR_ID_GPS 0x83 // Sensor ID 3 #define SENSOR_ID_SP2UR 0xC6 // Sensor ID 6 #define SENSOR_ID_28 0x1B // Sensor ID 28 // FrSky data IDs #define GPS_LONG_LATI_FIRST_ID 0x0800 #define DIY_FIRST_ID 0x5000 #define START_STOP_SPORT 0x7E #define BYTESTUFF_SPORT 0x7D /* for FrSky SPort Passthrough */ // data bits preparation // for parameter data #define PARAM_ID_OFFSET 24 #define PARAM_VALUE_LIMIT 0xFFFFFF // for gps status data #define GPS_SATS_LIMIT 0xF #define GPS_STATUS_LIMIT 0x3 #define GPS_STATUS_OFFSET 4 #define GPS_HDOP_OFFSET 6 #define GPS_ADVSTATUS_OFFSET 14 #define GPS_ALTMSL_OFFSET 22 // for battery data #define BATT_VOLTAGE_LIMIT 0x1FF #define BATT_CURRENT_OFFSET 9 #define BATT_TOTALMAH_LIMIT 0x7FFF #define BATT_TOTALMAH_OFFSET 17 // for autopilot status data #define AP_CONTROL_MODE_LIMIT 0x1F #define AP_SIMPLE_OFFSET 5 #define AP_SSIMPLE_OFFSET 6 #define AP_FLYING_OFFSET 7 #define AP_ARMED_OFFSET 8 #define AP_BATT_FS_OFFSET 9 #define AP_EKF_FS_OFFSET 10 #define AP_IMU_TEMP_MIN 19.0f #define AP_IMU_TEMP_MAX 82.0f #define AP_IMU_TEMP_OFFSET 26 // for home position related data #define HOME_ALT_OFFSET 12 #define HOME_BEARING_LIMIT 0x7F #define HOME_BEARING_OFFSET 25 // for velocity and yaw data #define VELANDYAW_XYVEL_OFFSET 9 #define VELANDYAW_YAW_LIMIT 0x7FF #define VELANDYAW_YAW_OFFSET 17 // for attitude (roll, pitch) and range data #define ATTIANDRNG_ROLL_LIMIT 0x7FF #define ATTIANDRNG_PITCH_LIMIT 0x3FF #define ATTIANDRNG_PITCH_OFFSET 11 #define ATTIANDRNG_RNGFND_OFFSET 21 class AP_Frsky_Telem { public: AP_Frsky_Telem(); /* Do not allow copies */ AP_Frsky_Telem(const AP_Frsky_Telem &other) = delete; AP_Frsky_Telem &operator=(const AP_Frsky_Telem&) = delete; // init - perform required initialisation bool init(); // add statustext message to FrSky lib message queue void queue_message(MAV_SEVERITY severity, const char *text); // update error mask of sensors and subsystems. The mask uses the // MAV_SYS_STATUS_* values from mavlink. If a bit is set then it // indicates that the sensor or subsystem is present but not // functioning correctly uint32_t sensor_status_flags() const; private: AP_HAL::UARTDriver *_port; // UART used to send data to FrSky receiver AP_SerialManager::SerialProtocol _protocol; // protocol used - detected using SerialManager's SERIAL#_PROTOCOL parameter uint16_t _crc; uint32_t check_sensor_status_timer; uint32_t check_ekf_status_timer; uint8_t _paramID; ObjectArray _statustext_queue; struct { char lat_ns, lon_ew; uint16_t latdddmm; uint16_t latmmmm; uint16_t londddmm; uint16_t lonmmmm; uint16_t alt_gps_meters; uint16_t alt_gps_cm; uint16_t alt_nav_meters; uint16_t alt_nav_cm; int16_t speed_in_meter; uint16_t speed_in_centimeter; } _gps; struct { uint8_t new_byte; bool send_attiandrng; bool send_latitude; bool send_chunk; uint32_t params_timer; uint32_t ap_status_timer; uint32_t batt_timer; uint32_t batt_timer2; uint32_t gps_status_timer; uint32_t home_timer; uint32_t velandyaw_timer; uint32_t gps_latlng_timer; } _passthrough; struct { bool sport_status; uint8_t fas_call; uint8_t gps_call; uint8_t vario_call; uint8_t various_call; } _SPort; struct { uint32_t last_200ms_frame; uint32_t last_1000ms_frame; } _D; struct { uint32_t chunk; // a "chunk" (four characters/bytes) at a time of the queued message to be sent uint8_t repeats; // send each message "chunk" 3 times to make sure the entire messsage gets through without getting cut uint8_t char_index; // index of which character to get in the message } _msg_chunk; // main transmission function when protocol is FrSky SPort Passthrough (OpenTX) void send_SPort_Passthrough(void); // main transmission function when protocol is FrSky SPort void send_SPort(void); // main transmission function when protocol is FrSky D void send_D(void); // tick - main call to send updates to transmitter (called by scheduler at 1kHz) void loop(void); // methods related to the nuts-and-bolts of sending data void calc_crc(uint8_t byte); void send_crc(void); void send_byte(uint8_t value); void send_uint32(uint16_t id, uint32_t data); void send_uint16(uint16_t id, uint16_t data); // methods to convert flight controller data to FrSky SPort Passthrough (OpenTX) format bool get_next_msg_chunk(void); void check_sensor_status_flags(void); void check_ekf_status(void); uint32_t calc_param(void); uint32_t calc_gps_latlng(bool *send_latitude); uint32_t calc_gps_status(void); uint32_t calc_batt(uint8_t instance); uint32_t calc_ap_status(void); uint32_t calc_home(void); uint32_t calc_velandyaw(void); uint32_t calc_attiandrng(void); uint16_t prep_number(int32_t number, uint8_t digits, uint8_t power); // methods to convert flight controller data to FrSky D or SPort format void calc_nav_alt(void); float format_gps(float dec); void calc_gps_position(void); };