/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#include "AP_Baro_BMP085.h"

#include <utility>
#include <stdio.h>

#include <AP_Common/AP_Common.h>
#include <AP_HAL/AP_HAL.h>

extern const AP_HAL::HAL &hal;

#define BMP085_OVERSAMPLING_ULTRALOWPOWER 0
#define BMP085_OVERSAMPLING_STANDARD      1
#define BMP085_OVERSAMPLING_HIGHRES       2
#define BMP085_OVERSAMPLING_ULTRAHIGHRES  3

#ifndef BMP085_EOC
#define BMP085_EOC -1
#define OVERSAMPLING BMP085_OVERSAMPLING_ULTRAHIGHRES
#else
#define OVERSAMPLING BMP085_OVERSAMPLING_HIGHRES
#endif

AP_Baro_BMP085::AP_Baro_BMP085(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::Device> dev)
    : AP_Baro_Backend(baro)
    , _dev(std::move(dev))
{ }

AP_Baro_Backend * AP_Baro_BMP085::probe(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::Device> dev)
{

    if (!dev) {
        return nullptr;
    }

    AP_Baro_BMP085 *sensor = new AP_Baro_BMP085(baro, std::move(dev));
    if (!sensor || !sensor->_init()) {
        delete sensor;
        return nullptr;
    }
    return sensor;

}

bool AP_Baro_BMP085::_init()
{
    union {
        uint8_t buff[22];
        uint16_t wb[11];
    } bb;

    // get pointer to i2c bus semaphore
    AP_HAL::Semaphore *sem = _dev->get_semaphore();

    // take i2c bus sempahore
    WITH_SEMAPHORE(sem);

    if (BMP085_EOC >= 0) {
        _eoc = hal.gpio->channel(BMP085_EOC);
        _eoc->mode(HAL_GPIO_INPUT);
    }


    uint8_t id;

    if (!_dev->read_registers(0xD0, &id, 1)) {
        return false;
    }

    if (id!=0x55) {
        return false;    // not BMP180
    }


    _dev->read_registers(0xD1, &_vers, 1);

    bool prom_ok=false;
    _type=0;

    // We read the calibration data registers
    if (_dev->read_registers(0xAA, bb.buff, sizeof(bb.buff))) {
        prom_ok=true;

    }

    if (!prom_ok) {
        if (_read_prom((uint16_t *)&bb.wb[0]))  { // BMP180 requires reads by 2 bytes
            prom_ok=true;
            _type=1;
        }
    }
    if (!prom_ok) {
        return false;
    }

    ac1 = ((int16_t)bb.buff[0] << 8) | bb.buff[1];
    ac2 = ((int16_t)bb.buff[2] << 8) | bb.buff[3];
    ac3 = ((int16_t)bb.buff[4] << 8) | bb.buff[5];
    ac4 = ((int16_t)bb.buff[6] << 8) | bb.buff[7];
    ac5 = ((int16_t)bb.buff[8] << 8) | bb.buff[9];
    ac6 = ((int16_t)bb.buff[10]<< 8) | bb.buff[11];
    b1 = ((int16_t)bb.buff[12] << 8) | bb.buff[13];
    b2 = ((int16_t)bb.buff[14] << 8) | bb.buff[15];
    mb = ((int16_t)bb.buff[16] << 8) | bb.buff[17];
    mc = ((int16_t)bb.buff[18] << 8) | bb.buff[19];
    md = ((int16_t)bb.buff[20] << 8) | bb.buff[21];

    if ((ac1==0 || ac1==-1) ||
        (ac2==0 || ac2==-1) ||
        (ac3==0 || ac3==-1) ||
        (ac4==0 || ac4==0xFFFF) ||
        (ac5==0 || ac5==0xFFFF) ||
        (ac6==0 || ac6==0xFFFF)) {
        return false;
    }

    _last_press_read_command_time = 0;
    _last_temp_read_command_time = 0;

    // Send a command to read temperature
    _cmd_read_temp();

    _state = 0;

    _instance = _frontend.register_sensor();

    _dev->register_periodic_callback(20000, FUNCTOR_BIND_MEMBER(&AP_Baro_BMP085::_timer, void));
    return true;
}

uint16_t AP_Baro_BMP085::_read_prom_word(uint8_t word)
{
    const uint8_t reg = 0xAA + (word << 1);
    uint8_t val[2];
    if (!_dev->transfer(&reg, 1, val, sizeof(val))) {
        return 0;
    }
    return (val[0] << 8) | val[1];
}

bool AP_Baro_BMP085::_read_prom(uint16_t *prom)
{
    bool all_zero = true;
    for (uint8_t i = 0; i < 11; i++) {
        prom[i] = _read_prom_word(i);
        if (prom[i] != 0) {
            all_zero = false;
        }
    }

    if (all_zero) {
        return false;
    }

    return true;
}

/*
  This is a state machine. Acumulate a new sensor reading.
 */
void AP_Baro_BMP085::_timer(void)
{
    if (!_data_ready()) {
        return;
    }

    if (_state == 0) {
        _read_temp();
    } else if (_read_pressure()) {
        _calculate();
    }

    _state++;
    if (_state == 25) {
        _state = 0;
        _cmd_read_temp();
    } else {
        _cmd_read_pressure();
    }
}

/*
  transfer data to the frontend
 */
void AP_Baro_BMP085::update(void)
{
    WITH_SEMAPHORE(_sem);

    if (!_has_sample) {
        return;
    }

    float temperature = 0.1f * _temp;
    float pressure = _pressure_filter.getf();

    _copy_to_frontend(_instance, pressure, temperature);
}

// Send command to Read Pressure
void AP_Baro_BMP085::_cmd_read_pressure()
{
    _dev->write_register(0xF4, 0x34 + (OVERSAMPLING << 6));
    _last_press_read_command_time = AP_HAL::millis();
}

// Read raw pressure values
bool AP_Baro_BMP085::_read_pressure()
{
    uint8_t buf[3];
    if (_dev->read_registers(0xF6, buf, sizeof(buf))) {
        _raw_pressure = (((uint32_t)buf[0] << 16)
                         | ((uint32_t)buf[1] << 8)
                         | ((uint32_t)buf[2])) >> (8 - OVERSAMPLING);
        return true;
    }

    uint8_t xlsb;
    if (_dev->read_registers(0xF6, buf, 2) && _dev->read_registers(0xF8, &xlsb, 1)) {
        _raw_pressure = (((uint32_t)buf[0] << 16)
                         | ((uint32_t)buf[1] << 8)
                         | ((uint32_t)xlsb)) >> (8 - OVERSAMPLING);
        return true;
    }

    _last_press_read_command_time = AP_HAL::millis() + 1000;
    _dev->set_speed(AP_HAL::Device::SPEED_LOW);
    return false;
}

// Send Command to Read Temperature
void AP_Baro_BMP085::_cmd_read_temp()
{
    _dev->write_register(0xF4, 0x2E);
    _last_temp_read_command_time = AP_HAL::millis();
}

// Read raw temperature values
void AP_Baro_BMP085::_read_temp()
{
    uint8_t buf[2];
    int32_t _temp_sensor;

    if (!_dev->read_registers(0xF6, buf, sizeof(buf))) {
        _dev->set_speed(AP_HAL::Device::SPEED_LOW);
        return;
    }
    _temp_sensor = buf[0];
    _temp_sensor = (_temp_sensor << 8) | buf[1];

    _raw_temp = _temp_sensor;
}

// _calculate Temperature and Pressure in real units.
void AP_Baro_BMP085::_calculate()
{
    int32_t x1, x2, x3, b3, b5, b6, p;
    uint32_t b4, b7;
    int32_t tmp;

    // See Datasheet page 13 for this formulas
    // Based also on Jee Labs BMP085 example code. Thanks for share.
    // Temperature calculations
    x1 = ((int32_t)_raw_temp - ac6) * ac5 >> 15;
    x2 = ((int32_t) mc << 11) / (x1 + md);
    b5 = x1 + x2;
    _temp = (b5 + 8) >> 4;

    // Pressure calculations
    b6 = b5 - 4000;
    x1 = (b2 * (b6 * b6 >> 12)) >> 11;
    x2 = ac2 * b6 >> 11;
    x3 = x1 + x2;
    //b3 = (((int32_t) ac1 * 4 + x3)<<OVERSAMPLING + 2) >> 2; // BAD
    //b3 = ((int32_t) ac1 * 4 + x3 + 2) >> 2;  //OK for OVERSAMPLING=0
    tmp = ac1;
    tmp = (tmp*4 + x3)<<OVERSAMPLING;
    b3 = (tmp+2)/4;
    x1 = ac3 * b6 >> 13;
    x2 = (b1 * (b6 * b6 >> 12)) >> 16;
    x3 = ((x1 + x2) + 2) >> 2;
    b4 = (ac4 * (uint32_t)(x3 + 32768)) >> 15;
    b7 = ((uint32_t) _raw_pressure - b3) * (50000 >> OVERSAMPLING);
    p = b7 < 0x80000000 ? (b7 * 2) / b4 : (b7 / b4) * 2;

    x1 = (p >> 8) * (p >> 8);
    x1 = (x1 * 3038) >> 16;
    x2 = (-7357 * p) >> 16;
    p += ((x1 + x2 + 3791) >> 4);

    if (!pressure_ok(p)) {
        return;
    }

    WITH_SEMAPHORE(_sem);

    _pressure_filter.apply(p);
    _has_sample = true;
}

bool AP_Baro_BMP085::_data_ready()
{
    if (BMP085_EOC >= 0) {
        return _eoc->read();
    }

    // No EOC pin: use time from last read instead.
    if (_state == 0) {
        return AP_HAL::millis() > _last_temp_read_command_time + 5;
    }

    uint32_t conversion_time_msec;

    switch (OVERSAMPLING) {
    case BMP085_OVERSAMPLING_ULTRALOWPOWER:
        conversion_time_msec = 5;
        break;
    case BMP085_OVERSAMPLING_STANDARD:
        conversion_time_msec = 8;
        break;
    case BMP085_OVERSAMPLING_HIGHRES:
        conversion_time_msec = 14;
        break;
    case BMP085_OVERSAMPLING_ULTRAHIGHRES:
        conversion_time_msec = 26;
    default:
        break;
    }

    return AP_HAL::millis() > _last_press_read_command_time + conversion_time_msec;
}